3d print intake manifold testing
 

https://cimg9.ibsrv.net/gimg/www.fit...7679103069.jpg
https://cimg0.ibsrv.net/gimg/www.fit...94404f2f07.jpg
https://cimg1.ibsrv.net/gimg/www.fit...4f7f92798c.jpg
https://cimg2.ibsrv.net/gimg/www.fit...a3625f676f.jpg


Stock intake manifold with 60mm throttle body max torque19kgm,max power 168ps,the new one with 60mm throttle body max 19kgm,max power 180ps.+12ps,Just one pull and the ecu was not remap because of insufficient material strength. Otherwise the result will be better.

subscribed, interesting to see how this all turns out

Very interested in where this goes. Keep us posted!!

That must be pretty extensively internally modified to be putting 180hp to a dynapack, also see that you are revving up past 7500 rpm? share some details of your motor setup please.

Also interested

Very interesting.