Konig Dial In - 15X7J ET35 (10.9Lb, Flow Formed)
#1
Konig Dial In - 15X7J ET35 (10.9Lb, Flow Formed)
So like most, I wanted some wheels. I wanted light weight, I wanted affordable, and I wanted something with decent strength. The Miata guys seem to rave about Konig and their "flow formed" (flow forged) wheels. Upon research, I decided that it was a perfect fit to me.
More info here for those who care:
https://konigwheels.com/wheels/flow-...heels/dial-in/
I found a steal locally, the wheels were in excellent condition and came with tires with 9/32nd tread, I couldnt say no
warning, fronts may POKE
Will 225/50s rub? It CAN, and it does for me
More info here for those who care:
https://konigwheels.com/wheels/flow-...heels/dial-in/
I found a steal locally, the wheels were in excellent condition and came with tires with 9/32nd tread, I couldnt say no
warning, fronts may POKE
Will 225/50s rub? It CAN, and it does for me
Last edited by evilchargerfan; 06-25-2018 at 03:24 PM.
#2
Those of you who know me in real life, know that I own a ton of alignment gear. But a fender roller is sadly one thing that I do not own as of this moment. I do have a friend that will eventually help me pull/roll my fenders, but in the mean time ... I took measures to buy myself some time
(disclaimer, dont try this at home)
I went as slow and gentle as I could, to avoid "bacon fenders"
(disclaimer, dont try this at home)
I went as slow and gentle as I could, to avoid "bacon fenders"
Last edited by evilchargerfan; 06-25-2018 at 03:17 PM.
#3
I am throwing on the Konig Hypergram 15x7.5 +35 offset in bronze. Running a 205/50/15 Maxxis Victra VR-1 tire. I'll post pics tonight. So excite!!! Trying to figure out the stock offset which I think is +53 on the EX rims, but all the misinformation is tough to sift through.
#4
I am throwing on the Konig Hypergram 15x7.5 +35 offset in bronze. Running a 205/50/15 Maxxis Victra VR-1 tire. I'll post pics tonight. So excite!!! Trying to figure out the stock offset which I think is +53 on the EX rims, but all the misinformation is tough to sift through.
OEM Honda Part 42700-T5R-A91 | Aluminum Wheel Disk (16 x 6J) (Hayes Lemmerz)
your 2017 ex wheels should be 16x6j et53, 24.21 lb
offset info obtained here:
https://www.hubcaphaven.com/p/21673/...700t5ra91.html
(ebay posts for the same wheels, seem to be in agreement on 53 offset)
#5
btw, your wheels are mine are similar in spec, cept yours is 0.5 wider. be prepared for some front poke..... or be ready to dial in some negative camber.
I'll be in vegas this weekend..... wanna buy some camber bolts?
I'll be in vegas this weekend..... wanna buy some camber bolts?
Thread
Thread Starter
Forum
Replies
Last Post
C2AUTOSPL
FIT-Vendor Sponsored Group Buys and Sales
212
06-30-2009 08:39 AM