FS: T1R 50S exhaust
#1
FS: T1R 50S exhaust
Just received my T1R 50S (street) exhaust today and going to install it and get some "driving impressions'
Like the T1R intake, I don't plan to keep these parts, it's more for testing and posting my take on the part..
Retail is $680 CAD + shipping + taxes
Selling $700 CAD..
pickup / deliver in GTA area or ship on buyer's expense
pictures posted.. will post intalled pics later
-----------
just found out that the axle back and the b-pipe section can be used independently.. so if anybody is interested:
B-Pipe = $370
axle back = $370
complete = $700
-----------
buy the exhaust and i will throw in the CF engine cover for $180
https://www.fitfreak.net/forums/canada-fit-forums-clubs/9495-fs-cf-engine-cover.html
-joe
Like the T1R intake, I don't plan to keep these parts, it's more for testing and posting my take on the part..
Retail is $680 CAD + shipping + taxes
Selling $700 CAD..
pickup / deliver in GTA area or ship on buyer's expense
pictures posted.. will post intalled pics later
-----------
just found out that the axle back and the b-pipe section can be used independently.. so if anybody is interested:
B-Pipe = $370
axle back = $370
complete = $700
-----------
buy the exhaust and i will throw in the CF engine cover for $180
https://www.fitfreak.net/forums/canada-fit-forums-clubs/9495-fs-cf-engine-cover.html
-joe
Last edited by sillypuddy; 11-22-2006 at 09:09 PM.
#3
2000-3500 the power is slightly better than stock, after 3500 to 5000, you can definitely feel the difference.
I ran with the silencer out and it's bearable, not too loud until you get the higher (>4500) rpms..
Going to drive around today and taking it off tomorrow..
for low end torque to mid range power, it's a very good exhaust
-joe
#5
Originally Posted by sillypuddy
Just received my T1R 50S (street) exhaust today and going to install it and get some "driving impressions'
Like the T1R intake, I don't plan to keep these parts, it's more for testing and posting my take on the part..
Retail is $680 CAD + shipping + taxes
Selling $750 CAD Firm..
pickup / deliver in GTA area or ship on buyer's expense
pictures posted.. will post intalled pics later
-----------
just found out that the axle back and the b-pipe section can be used independently.. so if anybody is interestd:
B-Pipe = $390
axle back = $390
complete = $750
-joe
Like the T1R intake, I don't plan to keep these parts, it's more for testing and posting my take on the part..
Retail is $680 CAD + shipping + taxes
Selling $750 CAD Firm..
pickup / deliver in GTA area or ship on buyer's expense
pictures posted.. will post intalled pics later
-----------
just found out that the axle back and the b-pipe section can be used independently.. so if anybody is interestd:
B-Pipe = $390
axle back = $390
complete = $750
-joe
#6
Originally Posted by Toy Yoda
How much did you buy it for? from AJ Racing, it's $680 CND. Why would anyone buy it for MORE that MSRP??
$680 MSRP doesn't include shipping OR taxes..
assuming you pick up local, you pay 680 + 7% BC PST + 6% GST = $768.40
for the east coast guys, it cost $60 to ship:
680 + 60 = 740 + 6% GST = $784.40
-joe
#7
Originally Posted by sillypuddy
in our part of canada, there is a thing called taxes :-)
$680 MSRP doesn't include shipping OR taxes..
assuming you pick up local, you pay 680 + 7% BC PST + 6% GST = $768.40
for the east coast guys, it cost $60 to ship:
680 + 60 = 740 + 6% GST = $784.40
-joe
$680 MSRP doesn't include shipping OR taxes..
assuming you pick up local, you pay 680 + 7% BC PST + 6% GST = $768.40
for the east coast guys, it cost $60 to ship:
680 + 60 = 740 + 6% GST = $784.40
-joe
#8
the b-pipe was never installed and the rear section was installed for 1 hour, driving back from my mechanic to my house, where I received the tanabe axle back (never installed) and my fujitsubo (installed and keeping)
so for 1 hour's usage, i should lose 30-50% of the value according to your logic
btw.. i sold 2 items here used (a-spec axle back and t1r CF air box) for 10% less than what i paid.. if you are looking for a bargin, go elsewhere, because i rather cut this exhaust into little pieces than to give in to your lowballing
thanks for crapping on my thread btw..
-joe
so for 1 hour's usage, i should lose 30-50% of the value according to your logic
btw.. i sold 2 items here used (a-spec axle back and t1r CF air box) for 10% less than what i paid.. if you are looking for a bargin, go elsewhere, because i rather cut this exhaust into little pieces than to give in to your lowballing
thanks for crapping on my thread btw..
-joe
Last edited by sillypuddy; 11-19-2006 at 08:57 PM.
#9
Originally Posted by sillypuddy
thanks for crapping on my thread btw..
-joe
#10
i am not pissed off.. seems like every reply from you was just pushing the issue
since you are in BC, it's easier for you to go and pick it up.. the rest of us needs to pay shipping to east coast
since Toy Yoda thinks it's expensive.. i will just keep it for myself then.. all prices should be approved by Toy Yoda!
-joe
since you are in BC, it's easier for you to go and pick it up.. the rest of us needs to pay shipping to east coast
since Toy Yoda thinks it's expensive.. i will just keep it for myself then.. all prices should be approved by Toy Yoda!
-joe
#11
Originally Posted by sillypuddy
since Toy Yoda thinks it's expensive.. i will just keep it for myself then.. all prices should be approved by Toy Yoda!
-joe
Thread
Thread Starter
Forum
Replies
Last Post
Shu
2nd Generation GE8 Specific For Sale/WTB Used Parts Sub-Forum
9
02-16-2013 10:30 PM
k20a298ek
2nd Generation GE8 Specific For Sale/WTB Used Parts Sub-Forum
4
06-12-2010 02:20 PM
Spooling
For Sale / Want To Buy / Classified Ads for USED Fit Items
13
01-11-2010 02:04 PM