planning to uy & Install B&M #70255 SuperCooler

Reply Subscribe

Thread Tools

Search this Thread

11-29-2007, 04:24 PM

sanosuque

Member

Thread Starter

Join Date: Dec 2006

Location: Guaynabo

Posts: 22

planning to uy & Install B&M #70255 SuperCooler

I'm interesting in the Turbo for my Honda fit A/T.jejjee

I got a question...

I'm interesting in Buy the cooler for the tranny

B&M #70255 SuperCooler Automatic Transmission Cooler

eBay Motors: B&M #70255 SuperCooler Automatic Transmission Cooler (item 300145644931 end time Nov-25-07 08:00:44 PST)

This type of cooler is easy to install? It can void the warranty?
Its necessary to Make a hole into the tranny for the cable or something? thanks

12-10-2007, 02:15 PM

Kostas

Member

Join Date: Dec 2005

Location: Greece

Posts: 64

Quote:

Originally Posted by sanosuque

I do not think that is necessary.

Fit transmission has already cooler system for the oem engine radiator.

12-10-2007, 04:31 PM

sanosuque

Member

Thread Starter

Join Date: Dec 2006

Location: Guaynabo

Posts: 22

Quote:

Originally Posted by Kostas

I do not think that is necessary.

Fit transmission has already cooler system for the oem engine radiator.

so..it can support a turbo with the factory cooler? interesting.

12-10-2007, 10:37 PM

Jsmitty

Member

Join Date: Nov 2007

Location: SW,IL

Posts: 58

Just get metal tubbing with the correct fitting, correct line size bent to match the factory one. It should run to a rubber hose then to metal tubing to the trans. Same method for the coolant lines from the radiator. I'm not exactly certain on this car, because I have a manual trans. Just going from general knowledge. Some people just use a small electric fan on the factory cooler. Just be careful cause it can going from a small idea to a real big mess. Research is key.