Okay i've searched, or atleast i think i've searched and i can't seem to find much info on the spoon header. Is anyone running this header? and whats the best place to buy one?

 

I to am intrested in findind out where I can pick up a spoon header

 

from what i have heard the spoon header wont fit NA fits because there is no bung for an o2 sensor. of course if you had the knowlege and skills... not to mention a huge pair, you could drill and weld one onto your super expesnsive spoon header. the fitment report thread from aj racing has it on there. the spoon and j's headers dont have o2 bungs.

 

how could they make a Header with out a O2 bung? That doesn't make any sense that they would make a header with out a bung for the O2 sensor, where did you hear that?

 

It's made for all the Jazz/Fit NOT USDM that's why there is no bung. The rest of the world uses a different O-2 sensor location. It's in the converter not the header.

 

thank you sir. other countries use different emissions standards so the way cars over seas are set up is different from the way we set ours up.
here is part of the aj-racing fitment report thread:

Parts that don't fit:
-all JDM brand front coil-over suspension will not fit without modifications
-JDM front bumper
-JDM HID headlamps
-ALL JDM hood
-JDM Fenders
-ALL JDM grills
-ALL JDM front or rear bumper or lip / apron (ONLY side skirts will fit)
-Mugen hatch filler (cannot fit without JDM bumper)
-J's/Spoon Engine Torque Damper
-J's/Spoon throttlebody
-Some JDM intakes (will hit against the battery becasue of the drive by wire system made the TB sit further out)
-Spoon blue wide mirrors
-J's Racing Cross bar
-J's Racing floor bar
-Spoon header
-All JDM header
-earlier model GD1/GD2 exhaust b-pipe will not fit
-Cusco Lower tie bar
-ALL LHD Radio panel (will fit with modifications)
-Honda Veni Intake (will fit with modifications)
-ALEX Aluminum undertray (will fit with mofications)
-J's Racing and ATS Final gear

 

yes the bung in our jazz's r on the cat converter.. was tempted by spoon europe wen they offered me a 20% off if i bought the header, bpipe and back box together, but thats way to expensive for me at the time.. the header goes for something like 400£+ which is 800$+...

 

Well i'm sure i've seen a US fit running the Mugen headers i just don't remember who it is off hand.. and those are JDM? unless he modded it which i doubt...

 

Quote:
Originally Posted by leonine
Can you please tell me why the JDM headers (spoon, mugen) will not fit the USDM model.

Thanks.

They are missing a spot where you can bolt your O2 sensor back on. I actaully fitted a Fit Arias GD8 Mugen header and it works.

is this the header you were talking about? this is the only one i have seen any one on the boards use.

 

Ok now that makes sense why it doesn't fit the USDM Fits, I have to tell you thought it realy sucks I wanted the Spoon header so I could have Spoon Exhaust from the Header back. . Off the top of your head do you know of any Header that does fit the USDM Fits thats NOT Megan.

 

well...
megan (i know you said except for, but its still an option)
weaponr street header
weaponr race hear
dc ceramic header
dme street header
t1r response header
and im pretty sure aspec makes a header for the fit now
mugen fit arias gd8 header (i think its the one on kingmotorsports.com)

i cant think of any more off the top of my head