Fit Engine Modifications, Motor Swaps, ECU Tuning Reference Library for Engine Modifications, Swaps and Tuning

Test pipe+b-pipe+axleback=fart can?

Thread Tools
 
Search this Thread
 
  #1  
Old 09-04-2008, 02:47 AM
joquio's Avatar
Member
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Location: Burnaby, B.C.
Posts: 493
Test pipe+b-pipe+axleback=fart can?

Ok here is the deal guys,

I just installed the T1R test pipe+Spoon B-pipe I got from a local member.
I already have the Aspec axleback. After I installed the parts I took the car for a quick spin. Now it was nightmare.... I felt soooo embarassed for the whole night. The car got noticable louder and I could understand that but whenever I "stepped" on the gas a bit harder the car sounds like it's gonna explode lol really high pitched ricer fart can tone.
I took the car the next morning to have the stock cat and stock muffler installed back on because I couldn't stand the sound any more seconds....

tone is drasticly reduced and I will probably have my aspec axleback installed back on tomorrow to see if it is still ok.

My point is, is it normal when you have the test pipe(cat delete) installed?
Or could it be exhaust leak? I always hear this pssshhh sound when I step on gas but my friend check for me and told me it's because of the straight through flowing b-pipe I have.

PS: Is there suppose be a gasket between the testpipe and b-pipe? Because I could find my stock one as I have looked on both end and I looked up on bernardiparts and they had one between oem cat and b-pipe in the image.
Any input ?
 
  #2  
Old 09-04-2008, 03:01 AM
Fa1's Avatar
Fa1
Fa1 is offline
Member
iTrader: (1)
Join Date: Jul 2008
Location: San Francisco, CA
Posts: 710
Sounds like a leak to me. You're suppose to have gaskets between all pipes.
 
  #3  
Old 09-04-2008, 03:07 AM
Spooling's Avatar
Member
5 Year Member
iTrader: (4)
Join Date: Jan 2008
Location: Vancouver Canada
Posts: 1,019
high pitched? mine sounds really low pitched. but running a test pipe on a mild modded Fit is kinda embarassing already. you can always go FI for quieter exhaust.
 
  #4  
Old 09-04-2008, 03:08 AM
spoonek4's Avatar
Member
5 Year Member
iTrader: (1)
Join Date: Jun 2006
Location: Vancouver, BC
Posts: 1,564
I gotta see your car in real & see if there's any leak, but it's hard to contact u on MSN.....

It's quite normal if it gets high pitch loud if u use an Aspec muffler though, same thing with APEXi N1 due to the big piping on the axleback part. If u want it to be quieter I suggest u to install the stock cat back on or some other muffler(like Mugen_Dom's Mugen muffler) on to your car.
 
  #5  
Old 09-04-2008, 03:22 AM
joquio's Avatar
Member
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Location: Burnaby, B.C.
Posts: 493
Originally Posted by 1WayFit
high pitched? mine sounds really low pitched. but running a test pipe on a mild modded Fit is kinda embarassing already. you can always go FI for quieter exhaust.
Do you have cat delete installed?
 
  #6  
Old 09-04-2008, 03:23 AM
joquio's Avatar
Member
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Location: Burnaby, B.C.
Posts: 493
Originally Posted by Fa1
Sounds like a leak to me. You're suppose to have gaskets between all pipes.
I do have gaskets on all EXCEPT between cat ---> B-pipe I couldn't find the stock gasket? (burned?)
 
  #7  
Old 09-04-2008, 03:25 AM
joquio's Avatar
Member
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Location: Burnaby, B.C.
Posts: 493
Originally Posted by spoonek4
I gotta see your car in real & see if there's any leak, but it's hard to contact u on MSN.....

It's quite normal if it gets high pitch loud if u use an Aspec muffler though, same thing with APEXi N1 due to the big piping on the axleback part. If u want it to be quieter I suggest u to install the stock cat back on or some other muffler(like Mugen_Dom's Mugen muffler) on to your car.
Thanks for the input jacky, I still need to make an appointment with you for the alignment.... let me hop on msn now
 
  #8  
Old 09-04-2008, 03:26 AM
Spooling's Avatar
Member
5 Year Member
iTrader: (4)
Join Date: Jan 2008
Location: Vancouver Canada
Posts: 1,019
Originally Posted by joquio
Do you have cat delete installed?
megan header->t1r test pipe->t1r b-pipe->t1r 50s
it sounds really low profile under 3k rpm, then it goes berserk after that
 
  #9  
Old 09-04-2008, 03:27 AM
Fa1's Avatar
Fa1
Fa1 is offline
Member
iTrader: (1)
Join Date: Jul 2008
Location: San Francisco, CA
Posts: 710
If I remember correctly I think the stock gasket was a donut gasket so you need a flat gasket which would come with the exhaust, but since you got it second hand you'll need another one.
 
  #10  
Old 09-04-2008, 03:28 AM
joquio's Avatar
Member
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Location: Burnaby, B.C.
Posts: 493
Originally Posted by 1WayFit
megan header->t1r test pipe->t1r b-pipe->t1r 50s
it sounds really low profile under 3k rpm, then it goes berserk after that
Like really loud and raspy? My ears almost explodes if I step on it really hard with the test pipe installed.
Would having a aftermarket header quiet things down?
 
  #11  
Old 09-04-2008, 03:35 AM
Spooling's Avatar
Member
5 Year Member
iTrader: (4)
Join Date: Jan 2008
Location: Vancouver Canada
Posts: 1,019
Originally Posted by joquio
Like really loud and raspy? My ears almost explodes if I step on it really hard with the test pipe installed.
Would having a aftermarket header quiet things down?
loud, deep and vibrant, not raspy. yea having a hi-flow header will tune the volume down a bit. but you will lose a lot of low end torque.
gotta save up for turbo
 
  #12  
Old 09-04-2008, 03:41 AM
Fa1's Avatar
Fa1
Fa1 is offline
Member
iTrader: (1)
Join Date: Jul 2008
Location: San Francisco, CA
Posts: 710
It's probably just better to keep the stock cat on if it's too loud for the few hp you gain.
 
  #13  
Old 09-04-2008, 03:43 AM
joquio's Avatar
Member
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Location: Burnaby, B.C.
Posts: 493
Originally Posted by Fa1
It's probably just better to keep the stock cat on if it's too loud for the few hp you gain.
Thanks for the input!
I will look into getting a flat gasket, any idea where to get those?
 
  #14  
Old 09-04-2008, 03:45 AM
Fa1's Avatar
Fa1
Fa1 is offline
Member
iTrader: (1)
Join Date: Jul 2008
Location: San Francisco, CA
Posts: 710
Any auto-parts store should have them. What's the inner diameter of the spoon b-pipe btw?
 
  #15  
Old 09-04-2008, 03:46 AM
joquio's Avatar
Member
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Location: Burnaby, B.C.
Posts: 493
Originally Posted by 1WayFit
loud, deep and vibrant, not raspy. yea having a hi-flow header will tune the volume down a bit. but you will lose a lot of low end torque.
gotta save up for turbo
HKS or Greddy?
It's hard to resist getting one when you already have the funding
But it's just not the right time for me to turbo this car yet
 
  #16  
Old 09-04-2008, 05:55 AM
joquio's Avatar
Member
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Location: Burnaby, B.C.
Posts: 493
so one more question,
1) oem cat+Spoon b-pipe+aspec axleback
or
2) T1R testpipe+oem b-pipe+aspec axleback

which one would yield more gain?
 
  #17  
Old 09-04-2008, 08:49 AM
GD3-Fit's Avatar
I <3 SPOON
5 Year Member
iTrader: (2)
Join Date: Sep 2007
Location: Limerick, PA
Posts: 1,928
Originally Posted by joquio
so one more question,
1) oem cat+Spoon b-pipe+aspec axleback
or
2) T1R testpipe+oem b-pipe+aspec axleback

which one would yield more gain?
^
it's hard to say
i'd think they are maybe about equal
i have a gasket between my TP and B-pipe
my exhaust is a little loud but if i take the spoon n1 off it's super loud

-Ricky
 
  #18  
Old 09-04-2008, 12:06 PM
isthata_scion's Avatar
Member
5 Year Member
iTrader: (16)
Join Date: May 2008
Location: VA
Posts: 1,687
Originally Posted by joquio
so one more question,
1) oem cat+Spoon b-pipe+aspec axleback
or
2) T1R testpipe+oem b-pipe+aspec axleback

which one would yield more gain?
I think it would make more sense to do option #1. you dont want less restrictive testpipe, then stock bpipe, then a less restrictive axleback. Just a thought though.
 
  #19  
Old 09-04-2008, 01:51 PM
Mr08FiT's Avatar
Member
5 Year Member
iTrader: (3)
Join Date: Aug 2007
Location: N. Brook, Chi
Posts: 424
Same...

This is exactly why I sold my Test-Pipe, I have A-spec: header, b-pipe, axel back. When I had the test-pipe on there was no header but the sound that came out the that exhaust was just awfull. I mean, to quote "Fart can" raspy. So I sold test pipe got header, leave everything else don't worry about power gains. Leave stock cat, and just grab a header. IMO
 
  #20  
Old 09-04-2008, 02:14 PM
fung88's Avatar
Member
5 Year Member
Join Date: Mar 2007
Location: Coquitlam
Posts: 438
same reason why i sold my testpipe actually! it was just wayy too loud for my commute!
 


Quick Reply: Test pipe+b-pipe+axleback=fart can?



All times are GMT -4. The time now is 02:08 PM.