Does anyone sell them for the fit? one of mine broke so i replaced it with one from pepboys and now its cracking and falling apart.. Id buy a whole set of them if they made them in something stiff that will last.

 

Check out Kartboy

 

I believe T1R makes some as well--not sure how comparable the prices are.

 

The Kartboy ones are urethane, and are a pain in the dick to install, but once they're on you don't have to worry about them breaking down. I believe you can get different colors as well, not that you'll ever see them.

 

awesome, im going to measure and then order some today. Thanks.

 

Make sure you've got some white lithium or something similar on hand when you go to install them. They don't want to flex much.

 

Yea white lithium or silicone helps

 

so kartboy or t1r for the straight ones but i found J's is the only ones with the 3 hole ones.



anyone know where I can order these j's ones?

 

You'll have to find a legit J's racing dealer, or try ebay. Where are these located? I haven't pulled any exhaust components off the fit yet.

 

All of the hangers are simliar to the kartboy ones except the one 3 hole mount which is at the back of the b-pipe

 

Don't waste your money... Just use hose clamps. Lightly turn the hose clamps so there is no slop in the stock hanger. Works great, and cost like a 1.50 each for stainless.

 

Using a hose clamp and shitty rubber hang right now and still the exhaust is moving around like crazy Id rather buy the urethane mounts and be done with this.

 

Guess you must have a really heavy exhaust or you don't take care of your car worth the shit. Stock hangers should last a lifetime.

 

Well, ive had serveral exhaust setups and and taken them off a few times.. that could be why. Im not sure how "taking care of my car" has anything to do with shitty rubber hangers stretching

 

Good ol' spit works to get them on. Every car that I have owned has gotten replacement hangers. As soon as an exhaust goes on the Fit, it too will receive new hangers. You don't have access to Juran pieces? They make the 3 hole mount, this mount has been common now since about 2002 on Hondas.

Juran

 

Im in florida.. if you have any idea how i can get any urethane 3 hole ones let me know. Im ready to order lol