Does anyone know if there are any carbon fiber spoilers available that mount in the same place and manner as the stock Fit Sport spoiler? Or are there any spoilers you can mount without having to go through all the trouble of patching up the holes that will be left after you remove the stock spoiler?

 

my kenstyle CF spoiler covers up the stock sport holes, as long as you remove the plastic inserts on the trunk. It goes right over the stock holes, and if you put double sided tape, you'll cover the holes and prevent water from going in.

 

One thing I'm curious about. How many and which brand CF spoilers install with the 2 sided tape? It would seem that any that installed with a long strip of 2 sided tape would hold well and also cover up the holes left by the factory spoiler.

 

i stated it already....

 

Well yes, you stated it for a CF spoiler that costs 500 bucks minimum. That's a bit extreme for me for a wing.

 

Does anybody know the difference between the spoon duckbill spoiler and the seibon carbon fiber SP spoiler?

 

seen the same one on ebay for $300


they are exactly the same except i think thee real spoon is a 2x2 weave and the seibon is 1x1

 

here u go my brotha.... Extreme dimensions oem style CF spoiler! Fit's exactly like oem, even has the little caps to cover them (those are in CF also!). It's a GREAT fitment with nothing more 2 do other then install and go! How do i know it fit's perfectly? well cuz that's my car they tested it on

Car and truck body kits & parts for mx3, s10, SUV, civic, neon, focus, etc.

And if u wanna go a lil balsy, here is an extended more aggressive version but mounts the same way, here is the GD-R wing. This can also be found on the Couture honda fit (the white one w/ the turbo'd k20 pushing 700hp)

Car and truck body kits & parts for mx3, s10, SUV, civic, neon, focus, etc.

 

That spoiler looks excellent, so does the GD-R version. I've been eyeballing the Spoon spoiler lately as well. Of course the only company I know that makes a spoon style CF spoiler that fits like OEM is N1 Concepts and they have been back ordered forever. It's hard to make decisions on something as life alteringly important as a spoiler! (sarcasm)

 

the spoon spoiler made by N1 doesnt mount in OEM locations. its just like the spoon and seibon.

 

does it cover the middle holes and mount on the oem end holes?

 

it does a ok job of covering the holes, but u can still see the middle. DOESNT mount in OEM location.

 

is this the same for the seibon cf spoon style?it doesn't bolt into oem holes?

 

THE SPOON, THE SEIBON, THE N1 ARE ALL THE SAME

 

so do i have to drill new holes then?

 

If you get a real spoon duckbill you're going to have to get a replacement rear wiper arm. The stock one hit's the spoon once installed.... I guess that's why Spoon sells a replacement rear wiper arm too lol.

 

i just want the carbon fiber copy from seibon

 

i have a spoon spoiler and it's mounted high enough that the wiper arm doesn't interfere. all OEM spoiler holes are covered. don't forget the spoon antenna if you go this route.

 

so the seibon version is made the same as authentic spoon duckbill?i still have to change antenna with seibon version?if so,they need to state that on their site. invision or ipt motorsports dont say it either.