New Prototype Bodykit Poll! NEED OPINIONS!
6 Attachment(s)
Hey Guys and Gals, my name is Dave and our company VisionAutodynamics is making a new bodykit for the Honda Fit.
We want YOUR opinions and Suggestions (please make mature and helpfull posts) The following kits are the ones we narrowed it down for possible Kits. #1 JDM Buddy Club Attachment 64859 Attachment 64860 #2 Buddy Club 2 Attachment 64861 Attachment 64862 #3 Mugen RR Attachment 64863 Attachment 64864 We appreciate input, also, things you like about each kit and what you dont like for it, suggestions on other things you like from other bumpers/kits and any other comments you guys might have. www.visionautodynamics.com |
I think the 2nd one looks the best outta these.
|
I kinda of like the JDM one even though I am a Mugen girl the JDM looked a little cleaner to me.
Cat :x |
mugen rr kit forsure!!!!
|
RR if you must
|
I dont like 1 or 2.
mugen rr or nothing. |
only like the RR's rear bumper.....
|
mugen RR
hands down |
mugenn rr!!!
|
1 and 2 are ugly
3 looks awesome but i can't see it working for the honda fit. make it work |
I really like the JDM Buddy Club kit on the EP3 but I can't imagine it working on the Fit. So, my vote goes to the third one. Mugen looks best to me.
|
#1. the front is ok but not great and is very played out, the rest of the kit is ugly.
#2. Is the cleanest of the 3 but the front is ugly. I would only use the rear and sides. #3. the Mugen RR if it was the GD fit. And you didnt say weither it would be the GD or GE fit you would be making the kit for. I say you do the kenstyle sides and rear with the mugen front on the GD fit that does'nt require the JDM conversion in the front and no modification to the rear bumper support FTW http://i44.tinypic.com/15hhhud.jpg http://i44.tinypic.com/2h69d6v.jpg But My opinion is that for the GE fit the noblesse kit that would'nt require the JDM conversion in the front and works with the USDM rear bumper support would be the best. There is a factory mugen kit for the GE fit that is sold through the honda dealership if that helps.. Mugen dealer kit. http://i40.tinypic.com/6sdoo4.jpg http://i39.tinypic.com/35cg0om.jpg http://i41.tinypic.com/11uhhg3.jpg Noblesse http://i41.tinypic.com/41cg3.jpg http://i43.tinypic.com/6qhbgk.jpg Just my opinion and sorry for the long post. |
Originally Posted by HONDAJUNKIE
(Post 627480)
#1. the front is ok but not great and is very played out, the rest of the kit is ugly.
#2. Is the cleanest of the 3 but the front is ugly. I would only use the rear and sides. #3. the Mugen RR if it was the GD fit. And you didnt say weither it would be the GD or GE fit you would be making the kit for. I say you do the kenstyle sides and rear with the mugen front on the GD fit that does'nt require the JDM conversion in the front and no modification to the rear bumper support FTW http://i44.tinypic.com/15hhhud.jpg http://i44.tinypic.com/2h69d6v.jpg But My opinion is that for the GE fit the noblesse kit that would'nt require the JDM conversion in the front and works with the USDM rear bumper support would be the best. There is a factory mugen kit for the GE fit that is sold through the honda dealership if that helps.. Mugen dealer kit. http://i40.tinypic.com/6sdoo4.jpg http://i39.tinypic.com/35cg0om.jpg http://i41.tinypic.com/11uhhg3.jpg Noblesse http://i41.tinypic.com/41cg3.jpg http://i43.tinypic.com/6qhbgk.jpg Just my opinion and sorry for the long post. |
Dam I learned something new. Sorry for being a idiot.
So I will say #2 buddy club 2 kit for the GE fit and #3 mugen RR kit for the GD But I would still like to see the nobleses kit to the USDM kit with no mods. |
I Appreciate the opinions guys and girls!
So far the Mugen RR is getting the most votes. The Noblesse kit is something we've been thinking about making for the GE, The Fit has been selling very well which is why we want to make a new kit for it. Also, we're doing a Photoshop on how the Mugen RR would look on the FIT, I'll post all 3 Photoshopped and then you guys can get a clearer look on how it would look on the FIT. I thank you all for your responces and opinions, please keep them coming and if you can redirect other forum members here even if they dont like bodykits just to post an opinion on the 3 I'd really appreciate it. |
subscribed for GE bodykits
|
Mugen RR... FTW!!!
|
Originally Posted by HONDAJUNKIE
(Post 627645)
Dam I learned something new. Sorry for being a idiot.
So I will say #2 buddy club 2 kit for the GE fit and #3 mugen RR kit for the GD But I would still like to see the nobleses kit to the USDM kit with no mods. |
kenstyle kits...
i would buy that kit hands down |
Is this for the GD or GE? How about just make a nice lip kit for the GD?
|
Honda Fit extreme
I'd like to see a production run of the Honda Fit Extreme kit. It is tasteful yet not too agressive. Hopefully the kit could be made out of urethane for durability.
http://www.autocult.com.au/img/galle...aGhost1184.jpg http://www.desktopcar.net/wallpaper/...xtreme_104.jpg |
|
i like the front bumper on that fit....looks lifted :D
|
Originally Posted by towelie
(Post 628574)
|
Originally Posted by danger69
(Post 628139)
I'd like to see a production run of the Honda Fit Extreme kit. It is tasteful yet not too agressive. Hopefully the kit could be made out of urethane for durability.
http://www.autocult.com.au/img/galle...aGhost1184.jpg http://www.desktopcar.net/wallpaper/...xtreme_104.jpg Agreed. I really ike this one as well- minus the stripe detail. Some of these other kits are just too extreme looking with funky spoiler wings etc. Personally I like softer clean lines that flow more with car and less sharp angles in the details which just doesn't work as well. The Fabulous kit is gorgeous also. Other than that, I would say the Noblesse or the Mugen ones. I do like more of a wide body type which helps give a lower profile to the Fit. Lol, right now, I just wish someone would create some mud guards for the Fit Sport. They would help the rear end looks of the Fit a lot, IMO. |
Hey Guys, thanks for the responces, As for some of the questions:
Kit will be for the GE Fiberglass is the option for now The other suggestions are good also, the Extreme kit would look good but the rear wouldn't work because we wouldn't be able to center the exhaust in the middle because of not alot of people willing to buy yet alone find an exhaust like that, also fog lights in the front, things like that will spike up the price of production. |
Originally Posted by Firefly
(Post 628889)
Agreed. I really ike this one as well- minus the stripe detail. Some of these other kits are just too extreme looking with funky spoiler wings etc. Personally I like softer clean lines that flow more with car and less sharp angles in the details which just doesn't work as well. The Fabulous kit is gorgeous also.
Other than that, I would say the Noblesse or the Mugen ones. I do like more of a wide body type which helps give a lower profile to the Fit. Lol, right now, I just wish someone would create some mud guards for the Fit Sport. They would help the rear end looks of the Fit a lot, IMO. |
Originally Posted by HONDAJUNKIE
(Post 627480)
My opinion is that for the GE fit the noblesse kit that would'nt require the JDM conversion in the front and works with the USDM rear bumper support would be the SH!T
http://i41.tinypic.com/41cg3.jpg http://i43.tinypic.com/6qhbgk.jpg |
mugen rr ftmfw!!!!
|
We have already made the Noblesse Kit for the USDM Fit, but demand wasnt so high so we just have the mold in the back of the warehouse.
|
Originally Posted by perfectFITment
(Post 630741)
We have already made the Noblesse Kit for the USDM Fit, but demand wasnt so high so we just have the mold in the back of the warehouse.
|
Originally Posted by HONDAJUNKIE
(Post 630801)
I think its the best looking kit for the GE and GD fit But I have never seen it on sale on anybody's web site your included that would fit our USDM fit, and only on a few japanese websites and it doesnt fit the USDM car with out modification. There's not to many places that even have fit bodykits. I know I keep asking for the same thing but its because I dont see much for the fits and the few things I do just look tacky or like something from a F&F movie. I wouldnt expect the noblesse kit to sell well for the GE fit because it hasnt been out long, neither has the GD really. I like the RR kit but I think something a LiL more stealth would be better, something that would make the car look like a special edition, or stock sorta. Not like a custom ricemobile. Just my .02
The mold is perfect, we made 3 in urethane and sold them to a customer in Canada. For now we are going to make the Mugen RR kit, but before anything is made we want to photoshop it and see if it will work with the Fit styling, then I'll come back here and post it and see what people think of it. Also, if people were to be interested in the Noblesse kit then if we could get enough buyers, more than 10 then we can offer a Fitfreak discount of some kind. We'll try and get one made by next week and test fitted on a GD so you guys can see how it looks, only problem is finding fog lights for the holes. |
With the extreme kit you can always modify the rear of the exhaust and the front to lower the cost. For the rear I also like the INGS rear.
http://www.grounddynamics.com/Merchant/07HFWINGSFK.jpg |
Originally Posted by perfectFITment
(Post 630870)
For now we are going to make the Mugen RR kit, but before anything is made we want to photoshop it and see if it will work with the Fit styling, then I'll come back here and post it and see what people think of it. Also, if people were to be interested in the Noblesse kit then if we could get enough buyers, more than 10
What do yall got for us GD owner's? O yeah I forgot which rr kit you going to make the regular RR kit or one frome the RR advanced? |
Originally Posted by perfectFITment
(Post 630870)
Yeah I get what you mean, we actually never put the Noblesse kit on our website, we had our distributors advertise it and see if anyone would order it but demand wasn't high at all,so we had them stop sales on them. I also agree it's a good looking kit, very VIP style.
The mold is perfect, we made 3 in urethane and sold them to a customer in Canada. For now we are going to make the Mugen RR kit, but before anything is made we want to photoshop it and see if it will work with the Fit styling, then I'll come back here and post it and see what people think of it. Also, if people were to be interested in the Noblesse kit then if we could get enough buyers, more than 10 then we can offer a Fitfreak discount of some kind. We'll try and get one made by next week and test fitted on a GD so you guys can see how it looks, only problem is finding fog lights for the holes. 1:ghg78 |
1 Attachment(s)
hey if you guys are gonna make a lip kit what about the Shine Street front lip off a 2000+ eclipse? heres a pic of the lip on the bumper
Attachment 64375 |
Looks like the stuff used on the green eclipse in F&F 1 |
1 Attachment(s)
Attachment 64356
I dont know if I need a drivers licence or a passport for that thing:confused: |
hmmmmm?????
ok speaking of jdm this and that, i just bought yellow bulbs for my 09 fit sport. they look awsome at night, but i want my foglights to be noticed, even while they are off in the day time. now i was offered 2 options. option 1, was to spray paint the lens yellow. option 2, was to put a yellow film on them. i dont like either, cause i did that for my old ef and the got foggy after a month. does anyone know who sells the actuall yellow lens for my 09 fit sport?? hit me up!! i want em!!
|
another vote for the mugen rr kit if you're gonna make a body kit. i wonder if it'd look right on the ge though. i'm interested to see what you guys can do with photoshop!
|
All times are GMT -4. The time now is 07:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands