LED domelight on ebay
ok, sorry this took for ever, but i've been really busy with school (i'm taking winter session) and work. anywhoo, I tryed taking some night pics with my phone and you can't see anything cause camera phones sucks! I have a daytime pic but i'm not home at the moment, and i'll post it in the morning for sure. if you guys live near me then we could meet up somewhere and you can check it out for yourslef or you guys can wait till the next So Cal meet in Feb and check it out then.
sorry again for the really late response,
James
sorry again for the really late response,
James
Last edited by JamesBizzle; Feb 21, 2007 at 03:08 AM.
Member
Joined: Nov 2006
Posts: 171
From: LAKE FOREST, CA
if possible, i'd like to get some info about how your brother rewired the boards...if its not too hard, could you take a clean picture of the back of the board so i can see how he did it. since they're soldered in, maybe a diagram or just an explaination.
also wanting some pics of the lights in the car!
also wanting some pics of the lights in the car!
if possible, i'd like to get some info about how your brother rewired the boards...if its not too hard, could you take a clean picture of the back of the board so i can see how he did it. since they're soldered in, maybe a diagram or just an explaination.
also wanting some pics of the lights in the car!
also wanting some pics of the lights in the car!
pic of back of board. also, one of the two 101 Ohm resisters is located where the negtive wire (black) is connected on the bored and the other is to the left of the first one. there both black. I hope you guys can understand what i'm trying to say.
The metal where the wires are soldered at were bent to pinch and help hold the wires into place. The actual clips, where the original bulb is held at,were bent flat to make more room for the LED board to fit.
...and here it is double sided taped into place.
...here it in turned on...
... and how it looks durring the day with the cover put back on...
as for explaining how he did it, i really don't think I would be able to
. you might want to ask one of the other members on here that have more experience with electronics. hope this helped.
Last edited by JamesBizzle; Jan 15, 2007 at 06:43 AM.
*Bump* for any So Cal members that will be attending the Krispy Kreme meet on the Feb. 27th (next tuesday) and that would like to see how bright the light output is.
Output is pretty bright; I get coments about it all the time,even from people outside the car. I'm still very happy with the product.
Output is pretty bright; I get coments about it all the time,even from people outside the car. I'm still very happy with the product.
*BUMP*, THIS IS BASICALLY WHAT IT LOOKS LIKE BUT I GOT IT OFF EBAY.
https://www.fitfreak.net/forums/batt...unk-light.html
https://www.fitfreak.net/forums/batt...unk-light.html
Thread
Thread Starter
Forum
Replies
Last Post
Rubba Burna
General Fit Talk
10
Oct 12, 2008 09:09 PM
