I can't remember if I posted these here or not. Here are the most updated pics of mine.

 

My partial twin...
What X bar set up are you rockin?
And what muffler is that?

Ride is lookin good.

 

Thank you sir! It's a no name x bar I bought used off the classifieds here. It's basically a rear strut bar + 3 c pillar bars all connected. It looks pretty badass and you can actually tell a difference when you are really caning it thru the turns. The muffler is a Vibrant axleback. To me, it's perfect. Not too loud, but has a nice tone and doesn't look ridiculous. The fit and quality are pretty dang good on it too.

 

@Baller:
Did you black out the lower grille area including fogs?
I got to do my headlights like yours(after the Holidaze)

 

Yes sir. I did it when I was installing my fog lights. I had the base model, so had to cut out the openings for the fogs and did it while the bumper was off. I used a satin black spray paint and just took it slow with several light layers and wet sanded it all. It has held up really well, it's been over 2 years now. I used VHT nightshades on the fogs, also has held up pretty well. I think it really cleans up the front of the car a lot.

 

Thanks! Did you use one of the DIY here for your headlights? Any tips or tricks not mentioned you would suggest?

 

Yeah I used the one posted by smeister (I think that is the user name). I used semi-gloss high temp paint on mine and they turned out great. It's really pretty easy, the hardest part is not getting nervous about your headlights being in an oven. I bought extra sealant (butyl or something like that), but ended up not using it, the OEM stuff already on there melted back and sealed up fine. It's been 2 years and I haven't had any condensation on the inside at all. Just remove all the screws as you go and dont turn the headlight alignment disk on the back or you will have to re align the headlights when you reinstall - ask me how I know. Let me know if you have any other questions!

 

told you that you were my partial twin. wait until you see what else I got in the trunk with my x brace setup. I agree that the rear of the car got much stiffer.

 

Haha cool man! Yep, looks familiar. I like seeing it in my rearview mirror every day.

 

hows the rubbing?..im on 15x8 +25 and rears are rubbing so bad?..did you adjust camber?..

 

 

:dwow:d!!!!

 

What's the power increase on this?? Just looked and no GD model, but I know Kraftwerks is out there.

 

it definitely looks like he adjusted the camber.

I'm also on 15x8 +25 and had a bunch of rub. I ended up raising hte car up a bit and it isn't so bad now. I'm on 600lb springs in the rear

 

got me new shoes today.. polish 16x7 koing forward wheels

 

CWB - PR @ BRAZIL

 

Here's Mines. New to the forum. On D2 Coilovers.

[/IMG]

 

 

Stock. For now.

 

heres my beast, got it two days ago lol posted this pic in the general discussion already but i dont have any other pics yet.