N1Aero Spoon style rear duckbill spoiler, carbon fiber or fiberglass
EDIT: We just test fitted this on a USDM rear hatch and noticed the holes were completely different than JDM. The USDM spoiler has 2 threaded holes on the edge, with 3 pop rivets in the middle. The JDM hatches DO NOT have these 3 pop rivets in the middle. THEREFORE WE ARE SELLING THESE SPOILERS AT A VERY DISCOUNTED PRICE! Please be understood that when installed, the 2 side pop rivets will be covered up, but the middle one is slightly visable from looking directly above. WE ARE DOING THIS TO SELL WHAT WE HAVE RIGHT NOW, ALL SALES FINAL.
http://img.photobucket.com/albums/v4...3/2abbae09.jpg The JDM hatches DO NOT have the middle 3 white rivet holes, so it doesn't show, but on the USDM, the middle one will show slightly. Prices are at an all time low, we will never sell them for this cheap again, but you MUST PM me for pricing! --------------------------------------------------------------------------------------------------------------------- Introducing N1Aero's new lineup of rear duckbill spoilers for your GD1, GD2, or GD3!! These duckbills are modelled after the Spoon spoilers, and are made of either carbon fiber (cf) or fiberglass. Installation requires drilling of 2 holes into the factory rear hatch, as the spoilers do not utilize the factory mounting holes. Pictured is where the new hole needs to be drilled and the bolt is inserted. If you have any questions, feel free to PM me or call us at (650)-952-8288 Please PM me for pricing, as I cannot post the prices. Be sure to include your zipcode so I can calculate total shipped price to your door. http://img.photobucket.com/albums/v4...s/3e18f293.gif Here is the N1Aero carbon fiber duckbill installed on our N1 Project K20A Fit. Don't forget to also check out our JDM style LED taillights for sale here http://img.photobucket.com/albums/v4...3/15fcff19.jpg http://img.photobucket.com/albums/v4...3/1644282c.jpg http://img.photobucket.com/albums/v4...3/2ce3de44.jpg http://img.photobucket.com/albums/v4...3/3f05be1a.jpg http://img.photobucket.com/albums/v4...3/15db12ca.jpg http://img.photobucket.com/albums/v4...3/6fa76c7f.jpg http://img.photobucket.com/albums/v4...3/4b4e07ec.jpg http://img.photobucket.com/albums/v4...3/8e5e7bc0.jpg http://img.photobucket.com/albums/v4...g/8617afd6.jpg |
Why is it that NOTHING uses stock spoiler holes? Not knocking yours...Just saying WHY in general to all of the spoilers on the market? I would pick this up in a second if it used the stock holes :(
|
these would work fine w/ the base model as it does not have any pre-drilled holes to begin with, so it wont show the extra riveted holes from factory, you only see the holes with the sport models!!!!
|
im suffering more reading it that big:( Spoon style spoiler for the sport Fit's a no no. unless you want a hole in your back, of yer roof!
does this spoiler have the same original Spoon's issue? (wiper rubbing against it) |
Originally Posted by aallbbeerrtttttt
(Post 130021)
these would work fine w/ the base model as it does not have any pre-drilled holes to begin with, so it wont show the extra riveted holes from factory, you only see the holes with the sport models!!!!
Theres no way to get around seeing the hole? Removing the white washer/clip doesnt help or make it less obvious? Isnt this wing sold on Ebay.... Or is that you guys? |
Originally Posted by Mx6GT89
(Post 130069)
Holes? or one hole. You said just the middle hole is seen from a top view.
Theres no way to get around seeing the hole? Removing the white washer/clip doesnt help or make it less obvious? Isnt this wing sold on Ebay.... Or is that you guys? There is only one hole visable once the spoiler is installed on the SPORT model, on the BASE model, there are no pre-drilled holes so therefore nothing extra shows. Removing the clip helps, but then you have a bigger hole as the clip sort of takes up that empty space and fills it in. It's totally not visable from the side views, only visable looking from DIRECTLY above. |
Last time I spoke with Albert he only had 2 CF and 3 Fiberglass left!
|
I had the same problem with my VTi-S Spoiler, but nothing a little foam weatherstripping from Home Depot couldn't fix. If you wanted a CF wing, I would jump on this right away and go and pick up a pack of that weatherstripping!
|
Does this one have the same hole location as the spoon one? If you had the N1Aero one and drilled holes for it, then later decide to get a spoon one would you have to drill more holes for it is what I'm asking.
|
Albert told me these are exact replicas of the spoons so the real spoon spoiler should bolt right up to the same holes as this spoiler.
|
The real Spoon spoilers have the same mounting holes as N1Aero's since it was modelled after a real Spoon spoiler.
|
ALL SOLD OUT OF FIBERGLASS
I ONLY HAVE CARBON FIBER LEFT all orders have been shipped |
wouldnt by chance have a picture of a carbon fiber installed on the sport, with that hole you speak of. also could you pm me the price for the carbon fiber.
|
Originally Posted by itfits12
(Post 132026)
wouldnt by chance have a picture of a carbon fiber installed on the sport, with that hole you speak of. also could you pm me the price for the carbon fiber.
http://img.photobucket.com/albums/v4...3/3f05be1a.jpg http://img.photobucket.com/albums/v4...3/2ce3de44.jpg http://img.photobucket.com/albums/v4...3/1644282c.jpg |
can you pm me for pricing on a cf spoiler? zip code 85306
|
curious on price shipped to 33619
|
cf spoiler shipped to 18612. PM me please :D
I want I want |
cf shipped to 28562 please. thanks
|
Is this still going on? Price shipped to 97220?
|
All times are GMT -4. The time now is 12:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands