N1Aero Spoon style rear duckbill spoiler, carbon fiber or fiberglass
#1
N1Aero Spoon style rear duckbill spoiler, carbon fiber or fiberglass
EDIT: We just test fitted this on a USDM rear hatch and noticed the holes were completely different than JDM. The USDM spoiler has 2 threaded holes on the edge, with 3 pop rivets in the middle. The JDM hatches DO NOT have these 3 pop rivets in the middle. THEREFORE WE ARE SELLING THESE SPOILERS AT A VERY DISCOUNTED PRICE! Please be understood that when installed, the 2 side pop rivets will be covered up, but the middle one is slightly visable from looking directly above. WE ARE DOING THIS TO SELL WHAT WE HAVE RIGHT NOW, ALL SALES FINAL.
The JDM hatches DO NOT have the middle 3 white rivet holes, so it doesn't show, but on the USDM, the middle one will show slightly. Prices are at an all time low, we will never sell them for this cheap again, but you MUST PM me for pricing!
---------------------------------------------------------------------------------------------------------------------
Introducing N1Aero's new lineup of rear duckbill spoilers for your GD1, GD2, or GD3!! These duckbills are modelled after the Spoon spoilers, and are made of either carbon fiber (cf) or fiberglass.
Installation requires drilling of 2 holes into the factory rear hatch, as the spoilers do not utilize the factory mounting holes. Pictured is where the new hole needs to be drilled and the bolt is inserted.
If you have any questions, feel free to PM me or call us at (650)-952-8288
Please PM me for pricing, as I cannot post the prices. Be sure to include your zipcode so I can calculate total shipped price to your door.
Here is the N1Aero carbon fiber duckbill installed on our N1 Project K20A Fit. Don't forget to also check out our JDM style LED taillights for sale here
The JDM hatches DO NOT have the middle 3 white rivet holes, so it doesn't show, but on the USDM, the middle one will show slightly. Prices are at an all time low, we will never sell them for this cheap again, but you MUST PM me for pricing!
---------------------------------------------------------------------------------------------------------------------
Introducing N1Aero's new lineup of rear duckbill spoilers for your GD1, GD2, or GD3!! These duckbills are modelled after the Spoon spoilers, and are made of either carbon fiber (cf) or fiberglass.
Installation requires drilling of 2 holes into the factory rear hatch, as the spoilers do not utilize the factory mounting holes. Pictured is where the new hole needs to be drilled and the bolt is inserted.
If you have any questions, feel free to PM me or call us at (650)-952-8288
Please PM me for pricing, as I cannot post the prices. Be sure to include your zipcode so I can calculate total shipped price to your door.
Here is the N1Aero carbon fiber duckbill installed on our N1 Project K20A Fit. Don't forget to also check out our JDM style LED taillights for sale here
Last edited by aallbbeerrtttttt; 03-28-2007 at 07:04 PM.
#3
these would work fine w/ the base model as it does not have any pre-drilled holes to begin with, so it wont show the extra riveted holes from factory, you only see the holes with the sport models!!!!
Last edited by aallbbeerrtttttt; 04-03-2007 at 06:24 PM.
#4
im suffering more reading it that big Spoon style spoiler for the sport Fit's a no no. unless you want a hole in your back, of yer roof!
does this spoiler have the same original Spoon's issue? (wiper rubbing against it)
does this spoiler have the same original Spoon's issue? (wiper rubbing against it)
#5
Posts in the NUUDE
Retired Moderator
Retired Moderator
iTrader: (11)
Join Date: Aug 2006
Location: Orlando, FL
Posts: 8,956
Theres no way to get around seeing the hole? Removing the white washer/clip doesnt help or make it less obvious?
Isnt this wing sold on Ebay.... Or is that you guys?
#6
There is only one hole visable once the spoiler is installed on the SPORT model, on the BASE model, there are no pre-drilled holes so therefore nothing extra shows. Removing the clip helps, but then you have a bigger hole as the clip sort of takes up that empty space and fills it in. It's totally not visable from the side views, only visable looking from DIRECTLY above.
#8
I had the same problem with my VTi-S Spoiler, but nothing a little foam weatherstripping from Home Depot couldn't fix. If you wanted a CF wing, I would jump on this right away and go and pick up a pack of that weatherstripping!
Thread
Thread Starter
Forum
Replies
Last Post
TofuShop
3rd Gen GK Specific Fit Exterior Modifications & JDM Styling Sub-Forum
24
09-05-2021 02:39 PM
minitruckersfit
Fit Exterior Modifications & JDM Styling
8
05-23-2009 05:11 AM
Enzo Wagon
Fit Exterior Modifications & JDM Styling
11
05-11-2008 06:47 PM
Nerv2g
Fit Exterior Modifications & JDM Styling
5
03-02-2008 08:36 PM