What do you guys think?
What do you guys think?
Well I was inspired this past weekend at Kamispeed when I saw a set of sexy wedsport rims that were gunmetal with a red lip. So I took one of my stockies and experimented today. I will be adding a red H decal on the centercap. What do you all think? I am still undecided on this choice......
Last edited by mugenfit79; Apr 1, 2008 at 09:28 PM.
My Lips Bigger!
Joined: Nov 2007
Posts: 1,913
From: Orlando, FL
looks cool- but hopefully its just the camera- it makes it look like spray paint- not an even coat?..- hopefully its the the way it was shot and it looks better in person-
but ya i always liked the stock wheels
the only thing that i didnt get is how they "crammed" the 4 lugs randomly into the 5 spoke design doesnt really line up right if you look at it too long
but ya i always liked the stock wheels
the only thing that i didnt get is how they "crammed" the 4 lugs randomly into the 5 spoke design doesnt really line up right if you look at it too long
looks cool- but hopefully its just the camera- it makes it look like spray paint- not an even coat?..- hopefully its the the way it was shot and it looks better in person-
but ya i always liked the stock wheels
the only thing that i didnt get is how they "crammed" the 4 lugs randomly into the 5 spoke design doesnt really line up right if you look at it too long
but ya i always liked the stock wheels
the only thing that i didnt get is how they "crammed" the 4 lugs randomly into the 5 spoke design doesnt really line up right if you look at it too long
Yeah it looks that way because it has a reflective effect in the paint. It's duplicolor graphite rim paint. There are parts that are a little rough while others are pretty smooth. Gotta figure out what to do there...
I definelty need a better camera. lol. I will post new pics when I get the rims on the car....
Yup I saw those man. they were in a box right? They were nice but I want to get away from the all red wheel.
Yeah they did dude, Thinking of changing your rims again? Do you have
spacers on your wheels? I like the stance...
That looks awesome dude! Great job! I was thinking of rolling painted stockers, cause i like the look. I just hate the stance, 55offset is wayyyy to far in for my taste. Plus alot of people started rolling on painted stockers so i had to be diffrent. Honestly i like your current wheels better then those stockers on your car, your current wheels are SICK! But its your car!
Tyler
Tyler
Thanks for the comments guys. Well I think I must have done something wrong. I went home for lunch and I looked at my rims and after some good air drying the rims do have different shades of gunmetal to them. I am so pissed off. All that hard work. I don't know if I should redo them or dump the whole idea.....
I think those colors would look sick on your car....
Member
Joined: Sep 2006
Posts: 549
From: Dublin, CA., USA
Looks like you did not keep shaking the can as you were spraying. With regular paint it does not matter that much, but with metallics it is crucial!
Spray for 2-3 seconds, shake the can 2-3 times, spray for 2-3 seconds, shake 2-3 times, ......
For different texture problem you learn with experience to keep the same speed of movement across the painted surface. It then gives you more creative control to either have watery smooth finish or more satin pattern to your liking. You can always get some abrasive pads of 1500 grit or even 0000 and make it smooth. Of course it does not hurt to prep the surface by lightly sanding the wheel first and keep doing it between each coat of primer and latter paint. I know it is a pain, but quality and durability will show on the long run.
I took my time and it took me 3 days to get it done right.
Do not give up, learn from the experience and keep practicing. You have nothing to loose with OEM wheels! You can always have them sandblasted and professionally powder coated or anodized at any point! Sure it will cost a lot more and look good, but painting them right yourself will give you great sense of accomplishment and pride. Trust me!
Ivan
Spray for 2-3 seconds, shake the can 2-3 times, spray for 2-3 seconds, shake 2-3 times, ......
For different texture problem you learn with experience to keep the same speed of movement across the painted surface. It then gives you more creative control to either have watery smooth finish or more satin pattern to your liking. You can always get some abrasive pads of 1500 grit or even 0000 and make it smooth. Of course it does not hurt to prep the surface by lightly sanding the wheel first and keep doing it between each coat of primer and latter paint. I know it is a pain, but quality and durability will show on the long run.
I took my time and it took me 3 days to get it done right.
Do not give up, learn from the experience and keep practicing. You have nothing to loose with OEM wheels! You can always have them sandblasted and professionally powder coated or anodized at any point! Sure it will cost a lot more and look good, but painting them right yourself will give you great sense of accomplishment and pride. Trust me!
Ivan
i remember someone at another forum that painted their wheels
matte black... he said something like they had to wash it once
after the paint dried to get an even coated look.
matte black... he said something like they had to wash it once
after the paint dried to get an even coated look.
Member
Joined: Feb 2007
Posts: 425
From: fort lauderdale
i would try light sand and recoat with lots of shaking and dont let the paint fog up around the area to much, it will settle on the wheel as its drying in mid air and leave a fuzzy texture.
looks like a cool color combo anyhow.
props for diy.
looks like a cool color combo anyhow.
props for diy.
Looks like you did not keep shaking the can as you were spraying. With regular paint it does not matter that much, but with metallics it is crucial!
Spray for 2-3 seconds, shake the can 2-3 times, spray for 2-3 seconds, shake 2-3 times, ......
For different texture problem you learn with experience to keep the same speed of movement across the painted surface. It then gives you more creative control to either have watery smooth finish or more satin pattern to your liking. You can always get some abrasive pads of 1500 grit or even 0000 and make it smooth. Of course it does not hurt to prep the surface by lightly sanding the wheel first and keep doing it between each coat of primer and latter paint. I know it is a pain, but quality and durability will show on the long run.
I took my time and it took me 3 days to get it done right.
Do not give up, learn from the experience and keep practicing. You have nothing to loose with OEM wheels! You can always have them sandblasted and professionally powder coated or anodized at any point! Sure it will cost a lot more and look good, but painting them right yourself will give you great sense of accomplishment and pride. Trust me!
Ivan
Spray for 2-3 seconds, shake the can 2-3 times, spray for 2-3 seconds, shake 2-3 times, ......
For different texture problem you learn with experience to keep the same speed of movement across the painted surface. It then gives you more creative control to either have watery smooth finish or more satin pattern to your liking. You can always get some abrasive pads of 1500 grit or even 0000 and make it smooth. Of course it does not hurt to prep the surface by lightly sanding the wheel first and keep doing it between each coat of primer and latter paint. I know it is a pain, but quality and durability will show on the long run.
I took my time and it took me 3 days to get it done right.
Do not give up, learn from the experience and keep practicing. You have nothing to loose with OEM wheels! You can always have them sandblasted and professionally powder coated or anodized at any point! Sure it will cost a lot more and look good, but painting them right yourself will give you great sense of accomplishment and pride. Trust me!
Ivan
Whoa that sounds interesting. Hey wouldn't hurt to try, lol....