16x8-White on White
#1
16x8-White on White
Picked up some new wheels(well, used new wheels). Tires are brand new. Should be going on soon, but need to have the fenders rolled and pulled first. I also have SPC camber bolts for the front, and shims for the rear. Hopefully by next week, I'll have them on.
Specs:
16x8 Rota Grids offroad
Offset 10
Tires Yokohama S drives 195/40/16
Here are a few pics:
*Added new pics 1/29/12
Tires, pretty light stretch. Was hoping for more, but it'll have to do.
New Pics:
Specs:
16x8 Rota Grids offroad
Offset 10
Tires Yokohama S drives 195/40/16
Here are a few pics:
*Added new pics 1/29/12
Tires, pretty light stretch. Was hoping for more, but it'll have to do.
New Pics:
Last edited by DMC; 01-29-2012 at 12:38 PM.
#5
Absolutely, the fenders will need to be modded to accomodate this size wheel. That's why I mentioned in my original post, that I will have the fenders rolled, and pulled before mounting the wheels.
#14
Right now, I'm currently on Tanabe springs. I really want coilovers though, but hopefully that will be my next purchase. And Thanks.
I ran into a few fitment problems, and trying to work that out right now. Hopefully get some pics up soon.
I ran into a few fitment problems, and trying to work that out right now. Hopefully get some pics up soon.
#17
Yeah, I've been looking at your write up on the diy rear camber mod(very nice btw), and it looks like that's what I'll be doing at some point. I have the spc rear camber kit(shims), but I'm pretty sure that ain't hardly going to be enough camber for what I want to do! Haha. I pulled the hell out of the fenders as well, and I'm running a lot of bump stops for the time being, so for right now, there's no rubbing, the ride is pretty harsh, but still tolerable though. Pretty sure at this point too, that I would need coilovers to obviously go lower, because the way it sits right now, it's the lowest it will go.
What are you running for front camber, bolts?
What are you running for front camber, bolts?