USDM Honda Fit eyelids corrmann style
#1
*UPDATE!* USDM Honda Fit eyelids corrmann style 6/22/07
Well boys n girls, i have been searching online for a suitable supplier for some headlight eyelids and i FINALLY FOUND IT! I want to see who is interested in some CORRMANN STYLE headlight eyelids (or eyebrows) for the USDM honda fit.
To the mods, i have NOT sold anything nor am going to sell anything I am just gauging interest of a group buy on the eyelids. Those pictures were sent to me straight from the manufacturer, that means i do NOT have any eyelids in my posession. thanks.
We need a minimum of 10 people to get this group buy going. The supplier said that if i could do a group buy, it will probably be $40-50 shipped to your door (canadian's, maybe a little more). It all depends on how many we can get signed up. Without the group buy it'll be $50-60 shipped.
Corrmann style is one of the nicest set of headlight eyelids because it makes the fit look absoutely aggressive from any angle you look at because it actually wraps around the headlight, not jus sits on the hood side edge. Please look at the pics below. I know this is a JDM honda fit w/ the shorter front end but i assure you it will fit flawlessly on the USDM headlights:
More pix can be found on Welcome to CORRMANN official web site
the material will be made out of a non-painted fiberglass with a perfect fit and finish. I am working STRAIGHT with the manufacturer and i know a lot of you socal owners know me personally and they also know that i'm not looking for any profit at all (a lot of em ask me 2 install stuff and i don't charge ANYTHING) so i can assure u i will not make one penny out there. I just wanted these eyelids really badly and i found a manufacturer and he told me PERSONALLY that he can create them if there was enough interest. These products btw are made HERE IN THE UNITED STATES so no oversea stuff.
These are hand laid fibre glass custom fit not flat pieces of polyurethane or plastic vinyl. These curves to the headlight lenses so they fit and lay perfectly so they are not understress to lift off like other eyelids that are just flat pieces of material. They come primered with 3M High Performance double stick tape and ready to be painted.
Lets get this list going!! (please reply and add ur name at the end i will update the thread when needed)
*UPDATE!!!* Here are some prototype pix of the usdm Fit eyelids. Please take a look. Again this is a PROTOTYPE so don't worry if you don't like this design, it will be changed numerous times. I'm going to have it a little more angled and not curve around so much. But CHECK OUT THAT QUALITY!!!
EXCELLENT WE GOT THE MINIMUM. I will contact the manufacturer a.s.a.p. If anybody still wants in, come join because there is no cut-off date.
The manufacturer will start a mold THIS WEEKEND so be ready to see some pix.
1) koolkevin1107
2) george02
3) gimme
4) Illusive
5) sosoqtpinoy
6) pocketrocket
7) aliencowboy
8) hazzard
9) YeeFit
10) mmmkelley
11) Toy Yoda
12) mugenfit79
13) crucio
14) thejroisgo
15) FitSport2007_5spd
16) @fit@
17) DA_BOM FIT
18) Sugarphreak
19) hkjazz
To the mods, i have NOT sold anything nor am going to sell anything I am just gauging interest of a group buy on the eyelids. Those pictures were sent to me straight from the manufacturer, that means i do NOT have any eyelids in my posession. thanks.
We need a minimum of 10 people to get this group buy going. The supplier said that if i could do a group buy, it will probably be $40-50 shipped to your door (canadian's, maybe a little more). It all depends on how many we can get signed up. Without the group buy it'll be $50-60 shipped.
Corrmann style is one of the nicest set of headlight eyelids because it makes the fit look absoutely aggressive from any angle you look at because it actually wraps around the headlight, not jus sits on the hood side edge. Please look at the pics below. I know this is a JDM honda fit w/ the shorter front end but i assure you it will fit flawlessly on the USDM headlights:
More pix can be found on Welcome to CORRMANN official web site
the material will be made out of a non-painted fiberglass with a perfect fit and finish. I am working STRAIGHT with the manufacturer and i know a lot of you socal owners know me personally and they also know that i'm not looking for any profit at all (a lot of em ask me 2 install stuff and i don't charge ANYTHING) so i can assure u i will not make one penny out there. I just wanted these eyelids really badly and i found a manufacturer and he told me PERSONALLY that he can create them if there was enough interest. These products btw are made HERE IN THE UNITED STATES so no oversea stuff.
These are hand laid fibre glass custom fit not flat pieces of polyurethane or plastic vinyl. These curves to the headlight lenses so they fit and lay perfectly so they are not understress to lift off like other eyelids that are just flat pieces of material. They come primered with 3M High Performance double stick tape and ready to be painted.
Lets get this list going!! (please reply and add ur name at the end i will update the thread when needed)
*UPDATE!!!* Here are some prototype pix of the usdm Fit eyelids. Please take a look. Again this is a PROTOTYPE so don't worry if you don't like this design, it will be changed numerous times. I'm going to have it a little more angled and not curve around so much. But CHECK OUT THAT QUALITY!!!
EXCELLENT WE GOT THE MINIMUM. I will contact the manufacturer a.s.a.p. If anybody still wants in, come join because there is no cut-off date.
The manufacturer will start a mold THIS WEEKEND so be ready to see some pix.
1) koolkevin1107
2) george02
3) gimme
4) Illusive
5) sosoqtpinoy
6) pocketrocket
7) aliencowboy
8) hazzard
9) YeeFit
10) mmmkelley
11) Toy Yoda
12) mugenfit79
13) crucio
14) thejroisgo
15) FitSport2007_5spd
16) @fit@
17) DA_BOM FIT
18) Sugarphreak
19) hkjazz
Last edited by koolkevin1107; 06-25-2007 at 11:32 AM. Reason: updated list
#5
I'm in, this is what i have been looking for
#6
1) koolkevin1107
2) george02
3) gimme
4) Illusive
5)sosoqtpinoy
2) george02
3) gimme
4) Illusive
5)sosoqtpinoy
#7
1) koolkevin1107
2) george02
3) gimme
4) Illusive
5)sosoqtpinoy
6) pocketrocket
i like those bumper splitters too
2) george02
3) gimme
4) Illusive
5)sosoqtpinoy
6) pocketrocket
i like those bumper splitters too
#8
Eyelids
1) koolkevin1107
2) george02
3) gimme
4) Illusive
5)sosoqtpinoy
6) pocketrocket
7) aliencowboy
2) george02
3) gimme
4) Illusive
5)sosoqtpinoy
6) pocketrocket
7) aliencowboy
#9
1) koolkevin1107
2) george02
3) gimme
4) Illusive
5)sosoqtpinoy
6) pocketrocket
7) aliencowboy
8) hazzard
2) george02
3) gimme
4) Illusive
5)sosoqtpinoy
6) pocketrocket
7) aliencowboy
8) hazzard
#12
is the price the same for the carbon eye lid...cuz i have interest in that... but if not im cool with the deal right now...
Last edited by sosoqtpinoy; 06-20-2007 at 01:29 AM.
#18
count me in if possible