Gauging interest in Carbon Fibre stuffs
thanks.
Member
Joined: May 2006
Posts: 136
From: NJ
=> CF Scope
Won't fit USDM without modification to the cowl covering. On the USDM Fit, that cowl covering does not come out, it will have to be cut.
=> CF Meter Cover + Ring
These will fit USDM, gauge cluster housing and the curvature of the dash on top the gauge cluster are the same.
=> Tow Hooks
How much for just the front tow hook with the carbon fiber piece?
For the US, shipping will be much cheaper if you used Singapore Post Welcome to SingPost. FedEx, DHL, UPS are always more expensive when shipping international.
Won't fit USDM without modification to the cowl covering. On the USDM Fit, that cowl covering does not come out, it will have to be cut.
=> CF Meter Cover + Ring
These will fit USDM, gauge cluster housing and the curvature of the dash on top the gauge cluster are the same.
=> Tow Hooks
How much for just the front tow hook with the carbon fiber piece?
For the US, shipping will be much cheaper if you used Singapore Post Welcome to SingPost. FedEx, DHL, UPS are always more expensive when shipping international.
Thread Starter
|
Member
Joined: Jul 2007
Posts: 43
From: Singapore
I do not know whether it's 1 or 3 pieces, this I'll check with my supplier. Pricing is at US$100 for the whole item.
Yes I ship to Indonesia, it will be around US$28.74 and takes around 2 working days.
Yes I ship to Indonesia, it will be around US$28.74 and takes around 2 working days.
Thread Starter
|
Member
Joined: Jul 2007
Posts: 43
From: Singapore
Thread Starter
|
Member
Joined: Jul 2007
Posts: 43
From: Singapore
Thank you for confirming this and the info on Singpost as well. You from Singapore?
The front tow hook alone is US$100. The carbon fiber piece is only given if both front and rear tow hooks are purchased.
The front tow hook alone is US$100. The carbon fiber piece is only given if both front and rear tow hooks are purchased.
=> CF Scope
Won't fit USDM without modification to the cowl covering. On the USDM Fit, that cowl covering does not come out, it will have to be cut.
=> CF Meter Cover + Ring
These will fit USDM, gauge cluster housing and the curvature of the dash on top the gauge cluster are the same.
=> Tow Hooks
How much for just the front tow hook with the carbon fiber piece?
For the US, shipping will be much cheaper if you used Singapore Post Welcome to SingPost. FedEx, DHL, UPS are always more expensive when shipping international.
Won't fit USDM without modification to the cowl covering. On the USDM Fit, that cowl covering does not come out, it will have to be cut.
=> CF Meter Cover + Ring
These will fit USDM, gauge cluster housing and the curvature of the dash on top the gauge cluster are the same.
=> Tow Hooks
How much for just the front tow hook with the carbon fiber piece?
For the US, shipping will be much cheaper if you used Singapore Post Welcome to SingPost. FedEx, DHL, UPS are always more expensive when shipping international.
http://www.geocities.com/primojdm@sb...t/000_0107.jpg
http://www.geocities.com/primojdm@sb...t/000_0108.jpg
http://www.geocities.com/primojdm@sb...t/000_0109.jpg
all we need now, is to know which side (left or right) has the extreme angle
Last edited by gimme; Jul 26, 2007 at 05:06 PM.
Member
Joined: Feb 2006
Posts: 159
From: Atlanta, Georgia, USA.
Anyone, in the USA, buy the CF cowl/scoop or Tow hooks with CF incert yet? Any feedback and pictures?
Thread Starter
|
Member
Joined: Jul 2007
Posts: 43
From: Singapore
It seems the angles are the direct opposite. Most probably becos of LHD(USDM) and RHD(JDM). I'll check with my supplier whether he can fabricate for LHD or not.
really? I took mine out to show aFe they could possibly make a ram air using that along with a scoop. It just pulled out, and snapped in.
http://www.geocities.com/primojdm@sb...t/000_0107.jpg
http://www.geocities.com/primojdm@sb...t/000_0108.jpg
http://www.geocities.com/primojdm@sb...t/000_0109.jpg
all we need now, is to know which side (left or right) has the extreme angle
http://www.geocities.com/primojdm@sb...t/000_0107.jpg
http://www.geocities.com/primojdm@sb...t/000_0108.jpg
http://www.geocities.com/primojdm@sb...t/000_0109.jpg
all we need now, is to know which side (left or right) has the extreme angle
Thread Starter
|
Member
Joined: Jul 2007
Posts: 43
From: Singapore
Thread Starter
|
Member
Joined: Jul 2007
Posts: 43
From: Singapore
Thread Starter
|
Member
Joined: Jul 2007
Posts: 43
From: Singapore
My supplier says he can fabricate 1 for LHD, but will need the stock piece for exact dimensions, else the fitting won't be 100%.
Will consider doing this only if order able to get the stock piece and a certain number of orders, else not worth the while.
Will consider doing this only if order able to get the stock piece and a certain number of orders, else not worth the while.
Member
Joined: Feb 2006
Posts: 159
From: Atlanta, Georgia, USA.
DOH! I realized that a little after my last post. Hadn't had time to edit my post. Oh well. If carbonseller's guy can't do it for us it's only a matter of time before someone else does. I want one and will get one - someday - somehow!
