anyone k20a a fit?
anyone here k20a an automatic fit what is needed? I have a k20a3 but no fit. I do need a Fit, any donors? Im thinking a high performance torque converter also.
|
There is Demensional 1 that will have theirs supposedly up and running in a month or so..
|
got a site or keep me posted?
|
Wouldn't the manual tranny get more out of that engine?
|
it may but if you drove the sport shift.... WOOOO HOOOO... high performance torque converter and sport shift and 160... that what im talking about.... 180 bhp with bolt ons!!!!!
|
To revive this topic, was wondering did u manage to do the swap?
I am actually looking at doing the same k20a3 with auto trans swap and was wondering if anyone has done it before, or knows of any complications etc. |
bad idea.
We have a 350z with an automatic sport shift and it lags when you want a higher gear. you shift but it takes a while till it shifts. you better off with a manual... unless you dont know how to use a stick.
|
Originally Posted by navadv
(Post 126589)
To revive this topic, was wondering did u manage to do the swap?
I am actually looking at doing the same k20a3 with auto trans swap and was wondering if anyone has done it before, or knows of any complications etc. I haven't done so. Im sure it can be done but you will have to modify a few things. My guess is that if you want to keep auto you need a RSX base or TSX trans (if you want a tsx pm me, I have a new one) .... you can then keep sport shift. also a RSX or Si engine harness and ecu. the primary reason for this is the Fit is a D-Series car... (if my memory is correct) and the Si is a K-series. if you just got a conversion wire and used the OLD ECU you wouldn't get the true (100%) performance of the motor but it will still be much better than the 109BHP. If you had a total of 5k im sure you can do it... and may have money left over if you do the work yourself or cheaply and you get the right deal on parts. but you definitely would need bigger and wider tires to handle the K-Series engine. and better springs at a minium to make a good driving car as well as a handling car. Your next step would be rear disc brakes. I would then focus on bolts ons ... if you think you may want more power than the Si get a RSX S or do the internals before you drop the motor in. Post back... once your done. i want to drive it. You can borrow my civic....hehe.. check it out. Welcome to TeamKO.net PS- Honda / Acura Sport Shift doesn't lag it intergrates "drive by wire" I can't speak for nissan. |
Originally Posted by TeamKO
(Post 126719)
I haven't done so. Im sure it can be done but you will have to modify a few things. My guess is that if you want to keep auto you need a RSX base or TSX trans (if you want a tsx pm me, I have a new one) .... you can then keep sport shift. also a RSX or Si engine harness and ecu. the primary reason for this is the Fit is a D-Series car... (if my memory is correct) and the Si is a K-series. if you just got a conversion wire and used the OLD ECU you wouldn't get the true (100%) performance of the motor but it will still be much better than the 109BHP.
If you had a total of 5k im sure you can do it... and may have money left over if you do the work yourself or cheaply and you get the right deal on parts. but you definitely would need bigger and wider tires to handle the K-Series engine. and better springs at a minium to make a good driving car as well as a handling car. Your next step would be rear disc brakes. I would then focus on bolts ons ... if you think you may want more power than the Si get a RSX S or do the internals before you drop the motor in. Post back... once your done. i want to drive it. You can borrow my civic....hehe.. check it out. Welcome to TeamKO.net PS- Honda / Acura Sport Shift doesn't lag it intergrates "drive by wire" I can't speak for nissan. |
Yup L15A1 USDM Fit ENgine Code
|
Originally Posted by TeamKO
(Post 33436)
anyone here k20a an automatic fit what is needed? I have a k20a3 but no fit. I do need a Fit, any donors? Im thinking a high performance torque converter also.
|
Yeah - im sry i should have mentioned this - im not in the US.
I live in the UAE, in Dubai. Out here the K20a3 comes out of a Honda Stream and i can get the auto trans from it as well (cant find a manual stream). It has the same specs as the base RSX. The engine is cheap as well. People here havent yet realized its potential - so the engine goes for about US $900. Whereas a k20a2 or k20a would be about US $6800. We used to get ALOT of engines here for cheap. The importers found out they could ship to US and make more money.... Besides that, i have been looking into the parts needed for the swap. Cant really get my hands on ony RSX parts (cause the car isnt sold here)...... Right now it looks doubtful i can do it.... :( |
Forgot to say Thanx for all the replies :)
|
the k20a3 isnt really performance oriented, but still an improvement to the L-series. If u're planning on swapping, might as well go for the best motor setup if possible. Ever look into a k24?
if you're stuck on using the a3, then think about using a a2 cylinder head on it and it will make almost the same HP as a stock k20a2. for more info on Fit K20/24 swaps, Honda Fit K-series Swap - K20A.org .:. The K Series Source . Honda / Acura K20a k24a Engine Forum |
Originally Posted by navadv
(Post 126783)
Yeah - im sry i should have mentioned this - im not in the US.
I live in the UAE, in Dubai. Out here the K20a3 comes out of a Honda Stream and i can get the auto trans from it as well (cant find a manual stream). It has the same specs as the base RSX. The engine is cheap as well. People here havent yet realized its potential - so the engine goes for about US $900. Whereas a k20a2 or k20a would be about US $6800. We used to get ALOT of engines here for cheap. The importers found out they could ship to US and make more money.... Besides that, i have been looking into the parts needed for the swap. Cant really get my hands on ony RSX parts (cause the car isnt sold here)...... Right now it looks doubtful i can do it.... :( Where is Dubai? Sounds like the best bet is to get a Dubian Engine and Trans? and ECU? etc.. |
Originally Posted by TeamKO
(Post 126826)
Where is Dubai? Sounds like the best bet is to get a Dubian Engine and Trans? and ECU? etc..
Dubai is part of the United Arab Emirates. |
All times are GMT -4. The time now is 05:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands