hey guys, so I just took a look at the fuse box in the US model and there is a place for DRLs but its got no fuse.. iam thinking if you put the correct amperage fuse in place it will work? so I know the canadian's have DRLs and so I would like to ask one of them to please take a look in the fuse box and tell me what amp the fuse is so then I can find one and put it in there and see what happens... nothing bad an happen and if it does iam under warranty!

 

look at the owner manual, it will tell you

 

the only thing i found in here is in the fuse location which reads..

No. Amps. Circuits Protected.
8 7.5A DRL*2
18 (10A) DRL*2

*2 canadian models

 

In the Canadian Honda vehicles that I have seen, the DRL system consists of a small control box housing some electronics and relays. And a couple of fuses in the fuse box that route power to the box.

In my 90 Civic and my 97 Prelude, the box is located behind the dash. I presume they use the same setup in newer Hondas. On the US Hondas, I believe the wiring harness is in place but ends with a open connector where the DRL box on Canadian cars plug into.

So my guess is that you would need both the DRL unit as well as a couple of fuses.

 

augh, to much work i think i will just turn on my lights when i drive around lol