FS: Final Speed Eraser 16 X 7 et 38 + 2 sets of tires! $400 JDM Discount YO! Must see
#1
07-30-2010, 01:49 PM
FS: Final Speed Eraser 16 X 7 et 38 + 2 sets of tires! $400 JDM Discount YO! Must see
SOLD!!!!!!!!!!!!!!!!!
Good afternoon all,
Due to my Track Junkie addiction, I have purchased a new set of wheels and tires to disguise myself as a miata. So old set up is for sale. here goes the description.
WILL SHIP! this price is BEFORE SHIPPING
JCrim
Tyler, TX
Price: SOLD!!!!!!!!!!!!!!!!!
Wheels: Final Speed Eraser 16 X 7.0 et38, 4 X 100
http://www.marukanet...ech/eraser.html
Tires (set 1, these are currently mounted): Toyo T1R 205/45/16 60%+ TREAD LIFE REMAINING!!! (besides 1 that has inside wear do to my alignment at the time
I just bought these things in March.
TOYO T1R
- New "Generation S" silica-reinforced, high-grip tread compound
- New silica compound that minimizes heat build-up
- Rigid shoulder rib-bands that improve cornering
- New "Generation S" silica-reinforced tread compound with higher wet-u
- Refined V-shaped main grooves for improved resistance to aquaplaning
- T-Mode Design Technology
- Rigid shoulder rib-bands that improve response
- High-modulus bead apex rubber
- High-modulus casing (rayon or polyester depending on size)
- Wide high-tensile steel belts
- T-Mode Design Technology
- Spiral-wound, jointless edge and cap plies (construction may vary by size)
- Jointless bead wire
- High-tensile belt reinforcement cap layer (construction may vary by size)
- High-modulus casing (rayon or polyester depending on size)
- Wide high-tensile steel belts
- T-Mode Design Technology
- Spiral-wound, jointless edge and cap plies (construction may vary by size)
- Jointless bead wire
- Rigid shoulder rib-bands that reduce irregular wear
- T-Mode Design Technology
- Rim protector
- High-dispersed silica that improves wear resistance
- Ultra-high molecular polymer that increases wear resistance
- Refined unidirectional tread pattern
- Optimized, low-profile design
- Modern sidewall styling
- V,W, and Y speed-rated (depending on size)
- UTQG Treadwear 280
- UTQG Traction AA
- UTQG Temperature A
Tires (set 2 all seasons): Yokohama AVID H4 205/45/16 40% tread life on 3, 10% on 1 of them. once again tread wear due to gheto old alignment
PM's welcome. or however you know how to contact me.
Good afternoon all,
Due to my Track Junkie addiction, I have purchased a new set of wheels and tires to disguise myself as a miata. So old set up is for sale. here goes the description.
WILL SHIP! this price is BEFORE SHIPPING
JCrim
Tyler, TX
Price: SOLD!!!!!!!!!!!!!!!!!
Wheels: Final Speed Eraser 16 X 7.0 et38, 4 X 100
http://www.marukanet...ech/eraser.html
Tires (set 1, these are currently mounted): Toyo T1R 205/45/16 60%+ TREAD LIFE REMAINING!!! (besides 1 that has inside wear do to my alignment at the time
I just bought these things in March.TOYO T1R
- New "Generation S" silica-reinforced, high-grip tread compound
- New silica compound that minimizes heat build-up
- Rigid shoulder rib-bands that improve cornering
- New "Generation S" silica-reinforced tread compound with higher wet-u
- Refined V-shaped main grooves for improved resistance to aquaplaning
- T-Mode Design Technology
- Rigid shoulder rib-bands that improve response
- High-modulus bead apex rubber
- High-modulus casing (rayon or polyester depending on size)
- Wide high-tensile steel belts
- T-Mode Design Technology
- Spiral-wound, jointless edge and cap plies (construction may vary by size)
- Jointless bead wire
- High-tensile belt reinforcement cap layer (construction may vary by size)
- High-modulus casing (rayon or polyester depending on size)
- Wide high-tensile steel belts
- T-Mode Design Technology
- Spiral-wound, jointless edge and cap plies (construction may vary by size)
- Jointless bead wire
- Rigid shoulder rib-bands that reduce irregular wear
- T-Mode Design Technology
- Rim protector
- High-dispersed silica that improves wear resistance
- Ultra-high molecular polymer that increases wear resistance
- Refined unidirectional tread pattern
- Optimized, low-profile design
- Modern sidewall styling
- V,W, and Y speed-rated (depending on size)
- UTQG Treadwear 280
- UTQG Traction AA
- UTQG Temperature A
Tires (set 2 all seasons): Yokohama AVID H4 205/45/16 40% tread life on 3, 10% on 1 of them. once again tread wear due to gheto old alignment
PM's welcome. or however you know how to contact me.
Last edited by JCrimson; 08-20-2010 at 12:14 PM. Reason: SOLD!!!!!!!!!!!!!!!!!
#6
07-30-2010, 05:06 PM
You have a PM back my good sir.
BTW what lugs are you running. They would look great on my BBP GE.
BTW what lugs are you running. They would look great on my BBP GE.
#7
07-30-2010, 05:13 PM
PM'ed back
the right pic are some mutiki sr48 extended open. the left is my current set (sold purps) they are not the blox knock offs, they are J's racing chromoly extended open lugs.
Description: Made in Japan.
Lug nuts are made of Chromium molybdenum steel (chrome-moly) A set comes with four nuts M12 x P1.5 17HEX The bolts are used in the Super Taikyu Series by the J’s S2000.
the right pic are some mutiki sr48 extended open. the left is my current set (sold purps) they are not the blox knock offs, they are J's racing chromoly extended open lugs.
Description: Made in Japan.
Lug nuts are made of Chromium molybdenum steel (chrome-moly) A set comes with four nuts M12 x P1.5 17HEX The bolts are used in the Super Taikyu Series by the J’s S2000.
#13
08-18-2010, 04:12 PM
What is the weight of the wheels? They look great but weight is my first concern for anything that rotates and goes up and down..... Too many cops on Broadway and the loop the last time I was in Tyler and I have been having problems with controlling my right foot lately.
#14
08-18-2010, 04:59 PM
haha, im not too sure on the weight, however I can tell you that they look pretty haha. im guessing 14 to 16 lbs sense they are 16x7s. this weight is guessed by merely picking them up. they are forged 1 piece.
Thread
Thread Starter
Forum
Replies
Last Post
mahout
General For Sale Section
2
01-13-2011 08:33 PM
