Guys, the time has come for me to move on. Between work and life, I don't get to track as often as I would like and hanging on to my Fit is not practical and it's like keeping a lion caged. My Fit is Street legal, and yes, you can DD it. I did this intentionally so I can always enjoy it and not just a few days a year. My Fit was built right, nothing was rushed, everything works as intended and its my pride and joy. I bought this car brand new and I am the 1 and only owner. This car was recently shot by Honda-Tuning magazine and will be published in the next month or so. The value of my car is $13,000 as if it was stock. Everyone knows this swap costs about $10,000 just to get the engine in the car with everything being oem stock parts. Most of my parts are aftermarket (the ones that count) in addition to a ton of custom work and modifications (see detailed list below.) Also, the long build threads are located below, please view the most recent post for updated pictures and specs.

Serious buyers only please! If you have any questions, feel free to PM me and I will reply asap.

213.47 WHP 164.11 TQ (Untuned/ street tune)
Last known weight: 2259lbs (without driver)

$14,000 obo Feel free to make me an offer. I am very reasonable.

-JDM K20A Type R (DC5 Type R)
-Brian Crower Valve Springs & Retainers
-NGK Laser Iridium Spark Plugs
-Hondata Intake Manifold Gasket
-Hasport 07-08 Fit K-Series Engine Mount Bracket Kit
-Hasport K-series Axles Honda Fit
-K-Tuned Idle Air Assist Delete
-Innovative/ Hybrid-Racing Billet Fit 85A Race Mount Kit
-Chasebays Custom Engine and Charge Harness
-Hybrid-Racing 70mm Throttle body
-Custom PRB Intake manifold port matched to 70mm
-Acura RDX 410 Injectors
-Hondata PRB KPro III
-RacePak Data Systems IQ3 RacePak
-RacePak Data Systems IQ3 to Hondata Interface V-Net cable
-EP3 Accelerator Pedal Assy
-EP3 Throttle Cable
-Hybrid Racing Autotensioning AC and power steering removal kit
-Hybrid-Racing Fuel Rail
-Hybrid-Racing (Russell) Fuel Pressure Gauge
-Hybrid-Racing Shifter Box
-Hybrid-Racing Shifter Cables
-Hybrid-Racing Cold Air Intake
-Hybrid Racing Breather Fiters
-Hybrid-Racing returnless fuel line kit
-Hybrid-Racing 1600CFM Electric Slim Fans
-BOSCH wide band O2 Sensor
-K-Tuned Thermostat Housing
-K-Tuned Upper Coolant Neck
-K-Tuned Coolant Hoses
-Password JDM Spark Plug Cover
-ClutchNet Stage 6 Racing E-Z Lock Sprung Hub Clutch Disc
-ClutchNet Stage 2 Pressure Plate
-Hasport Custom K20A to Honda Fit 3" Header
-Texas Chassis Works Custom Header back Burns SS 3" exhaust
-HushPower DBX 3" In/Out Muffler
-Van Meter Fabrications Hybrid-Racing Shifter to Honda Fit Box Assy
-Van Meter Fabrications Honda Fit Drive by cable conversion kit
-Van Meter Fabrications Radiator relocation kit
-Forged Racing Dual Core Aluminum Radiator
-Acura Integra GSR Modified Radiator Hoses
-Completely Gutted
-Removed the ABS system
-Removed every airbag and all airbag sensors and air bag inflation cartridges and all other unnecessary/ unwanted wiring
-949 Racing 6ul wheels, 15 X 8 et+36 rear and 15 X 9 et+36 front
-Nitto NT-01 225/45/15 front, Nitto NT-01 205/50/15 rear
-FastBrakes 2000 Acura Integra Type R all around brake conversion (12" rotors)
-FastBrakes Stailless Steel Brake lines
-Stoptech Slotted and Dimpled Rotors
-CarboTech XP10(front) XP8(rear) brake pads
-J's Racing Super Taikyu Chrome-moly Long Lug Nuts
-ARP Extended Studs
-949 racing Valve Stems (X2 per wheel)
-J's Racing Front and Rear tow hooks
-J's Racing front grill
-Custom Rogue Carbon Crowl Intake Scoop
-F1 Spec Type 3 Carbon Kevlar racing seat
-F1 Spec Type 2 Carbon Kevlar racing seat (for my larger passengers/ instructors)
-Nagisa Seat Rails (driver)
-Wedge Engineering seat bracket (passenger)
-Takata 6 Point Harnesses
-Skunk2 Pro C Coilovers with custom spring rates 12k front 10k rear
-PowerGrid custom Endlinks
-Alignment; Front = Camber -3.0° Toe = 0°
Rear = Camber -1.8° Toe = +0.17°
-Xenon Depot Bi Xenons HIDs 6500k and 3000k fogs
-Headlight Armor GT Racing Yellow Fog light covers
-J's Racing rear racing banner
-Rear wiper and motor delete
-all seat belts are removed and motors
-odyssey pc680 Battery
-Password JDM battery relocation kit
-All sound deadening has been removed from my car with dry ice, numatic chissel, and fire
-Nardi Torino Deep Corn 330mm steering wheel
-MER Custom 8 Point, tig welded cage
-The entire interior has been repainted to OEM Storm Silver Metalic after the cage installation
-Progress anti swap bar
-JDM Honda Access OEM Window Visors
-ALLVIEW Racers Mirror
-Longacre Mirror Bracket
-DIY carbon fiber stereo delete
-Mobil 1 synthetic 5w30
-GM syncromech friction modified tranny fluid
-ATE super blue brake fluid
-ATE super blue clutch fluid
-OEM Honda Coolant
-Red Line WaterWetter
-I/O Port Camera Mount

Chassis has 90,000 miles on it (stock odometer is still recording mileage)
K20A Type R engine has 35,000 miles on it.

Build Threads:

FitFreak.net (most up to date and current)
https://www.fitfreak.net/forums/fit-...tay-tuned.html

K20A.org
JCrim (dood with the honda fit) Lots of pics >.> - K20A.org .:. The K Series Source . Honda / Acura K20a k24a Engine Forum

Honda-Tech.com
JCrim's Honda GD3 (Road Racing Fit inside & Pics) - Honda-Tech

A few pics:

























front brakes (pics were taken right after install, everything is clean and dust free)


rear brakes


JCrim's K20A Type R Fit Dyno (untuned) - YouTube

JCrim's K20A Type R Honda Fit GD3 - YouTube

Updated price to $14,000 (that's 1K more than the stock value). The car is priced to sell. Feel free to contact me at jcrimson20@gmail.com

 

I'll still bring her out to the meet in Texas in a few days, don't worry. i just have to let her go guys. sorry.

 

dam bro that is one nice fit how did u do the rear disc brakes if u dont mind me asking u : /

 

thanks man. Fastbrakes sells a kit. you have to do a little modification to make everything work as it should. Not one of those "do it on your back in a garage" kind of jobs. you need a lift and a grinder, and beer... lol

 

Sad to see her go, but glad to see that you have your priorities in order. I hope she goes to a good home. Your thread was by far my favorite on FF. Good luck!

 

thanks a bunch man! I will of course miss her just as I have done for every other car I've previously sold. But life goes on. I am not emotionally attached to anything I own. I am at that point in my life where I have bigger goals.

 

Aww that sucks.

What's next?

 

will be a surprise

 

Well I tried

There comes a time when you have to do what you have to do, I understand completely. I hope you'll have a "next build" even if it's not in the near term.

GLWS, tis a fine machine.

 

um lots of beer....

Hate to see you sell the car but sometimes its time to move on

 

Trade + cash + food stamps?

 

Thanks man!

Next build will be an exotic.

hahah come get this L15A! ill hook you up man!!!!!!!!!!!!!

 

Sad day when that car goes, but having just bought my first house as well I fully understand.

PM me your price on the longblock/trans.. I'd rather give you the money then a pick'n'pull but they are going for awful cheap up here. I may be in a position to pick them up by the end of august if you still got them at that point.

Found two wrecked sub-50k mile 5MT GDs within 50 miles going for $350 for motor and trans if I pull and transport myself lol

 

PM'd!!!!!!!!!!!!!!!

 

price lowered/ updated. Feel free to make me an offer. I am very reasonable.

 

Keep us posted on your next project, hope this one finds a good home, she deserves it!

That price is un-freaking-beatable!

 

nice!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

thanks man! It should sell very fast. I'm going to miss her but I've missed all my other cars/ builds haha

thanks man! tell all your friends!

 

looking to get 16.5K OBO. I will also include the oem stock motor, tranny, and everything else stock that came out of the engine bay. let me know! Killer deal.

 

We can just trade cars