Haynes manual states to use RTV sealant in addition to the rubber
gasket. Helmes manual does not say to use rtv sealant. What do you
use?

 

I always use a small amount of RTV selant. The instructions for
installing
the waterpump usually also recommend the RTV. I use a small bead of the
red
stuff right on top of the rubber gasket. Make sure the engine-side
mating
surface is nice and clean.

- Justin

 

Gerry wrote:
> Haynes manual states to use RTV sealant in addition to the rubber
> gasket. Helmes manual does not say to use rtv sealant. What do you
> use?


----------------------------

A light film of silicone _grease_ is what I use, on the engine side,
otherwise you've got all kinds of gunk to scrape off next time you're in
there. If Honda thought glue was necessary, it would have been there
from the factory. They have this annoying concept of making parts fit
correctly without glue.

'Curly'