https://www.fitfreak.net/forums/pict...pictureid=8298
https://www.fitfreak.net/forums/memb...ts-hid-001.jpg Me and Hailie found the horn wiring in the front end and wired in the new horns! the trigger button is the red buttons on the steering wheel. One step closer :) |
Looking good Mike, Hope its not too cold?
|
Went to Home Depot and they where having a heater sale bought 2 oil filled radiator heaters for 40.00 a piece and is keeping the shop at 71 degrees when the temp is 40 with a north wind @10-15mph. These are nice and not an energy hog.
|
I have a natural gas heater you would find in a big warehouse in my garage and it works really good better than my furnace in the house. Its too cold for this time of year. I hope it stabilizes.
|
I guess I feel lucky. When I moved in, the garage at my house was insulated with that spray stuff.
It gets chilly but a knee high heater is enough for me. It just sucks my garage ends up being motorcycle storage and my truck storage. Id love a project Honda, its cheaper than Chevy parts. |
Originally Posted by SilverBullet
(Post 1213768)
Looking good Mike, Hope its not too cold?
thanks it's coming round, I'm actually seeing the light @ the end of the tunnel on this project. The heat does make it really nice. I have a large round K1 heater but I do a lot of cleaning and painting and don't like the boom factor. :( |
Originally Posted by Perrenoud Fit
(Post 1213774)
Hey Glenn
thanks it's coming round, I'm actually seeing the light @ the end of the tunnel on this project. The heat does make it really nice. I have a large round K1 heater but I do a lot of cleaning and painting and don't like the boom factor. :( Your car will be a nice cruiser if you keep it, the B16 is a fun motor to drive. |
Me & Hailie installed 2nd headlight/corner and wiring :)
She makes me so proud! At seven Hails was helping splice wires, getting the correct size splice ready, twisting the strands tight, understanding current flow - +, haha that's my girl! We took out all the cobbling I could find re-spliced and wrapped it all with wire loom.
We love the look of the angel eyes and HIDs are the deal. Another project on Lil Red done. |
Alarm speaker for under the hood
This is about as small as they get. It's 12v and LOUD for the size. It diapered under the hood. 2"x3" x1.5". It was small enough to be mounted on the back of the headlight assembly housing, pointing right out of the radiator support.
Added the horn relay last night lol but not till I burnt the contacts in the horn switches! eBay to the rescue found the exact same ones from America's bank/FINANCE CO.> China. Side note: everything mentioned here in this post came from China, sad huh. http://thumbs1.ebaystatic.com/d/l180...16104296_1.jpg |
Originally Posted by Perrenoud Fit
(Post 1213850)
She makes me so proud! At seven Hals was helping splice wires, getting the correct size splice ready, twisting the strands tight, understanding current flow - +, haha that's my girl!
|
Who?
Originally Posted by Subie
(Post 1215637)
Hahah!!! Never too young to start training them! :-) Who said l'il Mickey has to be a guy! Way to go Mike!
|
Front Bumper
https://www.fitfreak.net/forums/pict...pictureid=8323
H.O.K. Kandy Apple Red It was a good day :) https://www.fitfreak.net/forums/memb...ainted-002.jpg |
Christmas and notta, nuthin, no Civic today.
:) Merry Christmas to all. Big Mike :D |
Originally Posted by Perrenoud Fit
(Post 1216271)
Christmas and notta, nuthin, no Civic today.
:) Merry Christmas to all. Big Mike :D |
Looks great! Old school for the win!
|
Slick :{)
Wet sanded/buffed out & installed the inserts.
https://www.fitfreak.net/forums/pict...pictureid=8325 https://www.fitfreak.net/forums/memb...bumper-003.jpg |
Look great Mike..
|
Originally Posted by Btrthnezr3
(Post 1216316)
Looks great! Old school for the win!
She's been a lot of Fun getting her to this point. Soon soon the real fun begins!! |
Thanks Glenn
Originally Posted by SilverBullet
(Post 1216627)
Look great Mike..
:) Mike |
Originally Posted by Perrenoud Fit
(Post 1216630)
She's coming together sloowly but surly. I still can't wait to work on her every day and if I can't, I'm dreaming up new ideas, haha
:) Mike |
All times are GMT -4. The time now is 09:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands