WTB: short ram intake
Thread Starter
|
Member
Joined: Jul 2008
Posts: 30
From: Warren, MI
WTB: short ram intake
I just recently purchased a 08 silver storm honda fit, and love it!!
but im looking for a short ram intake for the honda fit
im looking for a aem or fuijtua sri
im located in MI, 48088
if you have one please pm or let me know how much you want for the intake shipped to 48088!!
but im looking for a short ram intake for the honda fit
im looking for a aem or fuijtua sri
im located in MI, 48088
if you have one please pm or let me know how much you want for the intake shipped to 48088!!
If you are interested in a little unique-ness and some DIY time, I've got most of the parts you'll need to bolt up an SRI. The piping is 3", 2.5" to 3" coupler for throttle body to piping, a silicone vacuum line or breather filter (use whatever you prefer) I ran it on my car for a few hundred miles then changed it up. The piping was cut from a contact I have at a performance shop out west; it's intercooler/turbo setup quality material. There are 2 90 degree pipes; if you go to autozone and get a 3" coupler, you can easily run the piping into the fender and create a a pseudo cold air/ram air setup; possibilities are all up to you.
The only thing missing is a cone filter; I can toss in a new one for about 20 bucks otherwise I can ship all the parts I have for 30 bucks, plus shipping.
If you want some photos let me know your email. One pipe was never used, both have sockets for your MAF sensor and a vacuum line. You can purchase rubber grommet plugs from any auto parts store to block the ones you done use (Or again, I can pick up a set for about 5 bucks and put it in the box) Or use silicone sealer to permanently seal any unused sockets (I slid the my cone filter up high enough to cover them.)
If not, it's all good - just thought I'd give you the option; this stuff is just sitting in my garage. Good luck with tracking down the setup you want!
-Nick
The only thing missing is a cone filter; I can toss in a new one for about 20 bucks otherwise I can ship all the parts I have for 30 bucks, plus shipping.
If you want some photos let me know your email. One pipe was never used, both have sockets for your MAF sensor and a vacuum line. You can purchase rubber grommet plugs from any auto parts store to block the ones you done use (Or again, I can pick up a set for about 5 bucks and put it in the box) Or use silicone sealer to permanently seal any unused sockets (I slid the my cone filter up high enough to cover them.)
If not, it's all good - just thought I'd give you the option; this stuff is just sitting in my garage. Good luck with tracking down the setup you want!
-Nick
Thread Starter
|
Member
Joined: Jul 2008
Posts: 30
From: Warren, MI
If you are interested in a little unique-ness and some DIY time, I've got most of the parts you'll need to bolt up an SRI. The piping is 3", 2.5" to 3" coupler for throttle body to piping, a silicone vacuum line or breather filter (use whatever you prefer) I ran it on my car for a few hundred miles then changed it up. The piping was cut from a contact I have at a performance shop out west; it's intercooler/turbo setup quality material. There are 2 90 degree pipes; if you go to autozone and get a 3" coupler, you can easily run the piping into the fender and create a a pseudo cold air/ram air setup; possibilities are all up to you.
The only thing missing is a cone filter; I can toss in a new one for about 20 bucks otherwise I can ship all the parts I have for 30 bucks, plus shipping.
If you want some photos let me know your email. One pipe was never used, both have sockets for your MAF sensor and a vacuum line. You can purchase rubber grommet plugs from any auto parts store to block the ones you done use (Or again, I can pick up a set for about 5 bucks and put it in the box) Or use silicone sealer to permanently seal any unused sockets (I slid the my cone filter up high enough to cover them.)
If not, it's all good - just thought I'd give you the option; this stuff is just sitting in my garage. Good luck with tracking down the setup you want!
-Nick
The only thing missing is a cone filter; I can toss in a new one for about 20 bucks otherwise I can ship all the parts I have for 30 bucks, plus shipping.
If you want some photos let me know your email. One pipe was never used, both have sockets for your MAF sensor and a vacuum line. You can purchase rubber grommet plugs from any auto parts store to block the ones you done use (Or again, I can pick up a set for about 5 bucks and put it in the box) Or use silicone sealer to permanently seal any unused sockets (I slid the my cone filter up high enough to cover them.)
If not, it's all good - just thought I'd give you the option; this stuff is just sitting in my garage. Good luck with tracking down the setup you want!
-Nick
i just want to buy one that all!! thanks though
I have a custom SRI I just completed, it's the Sid version with an extra bend. I need to get rid of it since I plan to go back to California eventually and can't have this intake there. It only has around 500 miles on it. You won't have to bother with drilling and other junk like that since I have already completed it. I am asking $45 picked up or $55 shipped. I live in Ann Arbor. Originally cost $75 just for parts, that's without all the tools needed for the install.
I have noticed a gain in acceleration, as well as 1-2 mpg increase with this upgrade. MPG will probably depend on driving style most though.
There is also a minor scratch on the back of one pipe from the drilling, but you can't see it once installed. Here is a picture. Let me know if you have any questions.
I have noticed a gain in acceleration, as well as 1-2 mpg increase with this upgrade. MPG will probably depend on driving style most though.
There is also a minor scratch on the back of one pipe from the drilling, but you can't see it once installed. Here is a picture. Let me know if you have any questions.
SleepyNyte: I live in SoCal and i have a Fujita SRI and axle back delete. My Fit is super loud and the cops haven't given my and trouble and I am around them a lot. Just don't do stupid things around them and they don't even notice you. Plus, I don't think it is illegal to have a CAI or SRI in Cali. Correct me if I'm wrong.
As for the intake: I say go DIY because it is the least expensive intake and yet it is still nice. Or go with the Fujita SRI, it is great and the sound is awesome. It is also easy to install. If your gonna get the Fujita get it from RMS Distributing - JDM - Sport Compact Car Performance Parts - Homepage, they have great service and prices and they ship fast. That's where I got mine from.
Here are some pictures of my set up:
If you have any questions, feel free to PM me. Good luck!
As for the intake: I say go DIY because it is the least expensive intake and yet it is still nice. Or go with the Fujita SRI, it is great and the sound is awesome. It is also easy to install. If your gonna get the Fujita get it from RMS Distributing - JDM - Sport Compact Car Performance Parts - Homepage, they have great service and prices and they ship fast. That's where I got mine from.
Here are some pictures of my set up:
If you have any questions, feel free to PM me. Good luck!
Last edited by goodyonsen; Aug 10, 2008 at 04:18 PM.
Thread Starter
|
Member
Joined: Jul 2008
Posts: 30
From: Warren, MI
SleepyNyte: I live in SoCal and i have a Fujita SRI and axle back delete. My Fit is super loud and the cops haven't given my and trouble and I am around them a lot. Just don't do stupid things around them and they don't even notice you. Plus, I don't think it is illegal to have a CAI or SRI in Cali. Correct me if I'm wrong.
As for the intake: I say go DIY because it is the least expensive intake and yet it is still nice. Or go with the Fujita SRI, it is great and the sound is awesome. It is also easy to install. If your gonna get the Fujita get it from http://rmsdistributing.com/default.aspx, they have great service and prices and they ship fast. That's where I got mine from.
Here are some pictures of my set up:
If you have any questions, feel free to PM me. Good luck!
As for the intake: I say go DIY because it is the least expensive intake and yet it is still nice. Or go with the Fujita SRI, it is great and the sound is awesome. It is also easy to install. If your gonna get the Fujita get it from http://rmsdistributing.com/default.aspx, they have great service and prices and they ship fast. That's where I got mine from.
Here are some pictures of my set up:
If you have any questions, feel free to PM me. Good luck!
Thread Starter
|
Member
Joined: Jul 2008
Posts: 30
From: Warren, MI
might have to order one tommrrow!!
thanks again
Thread Starter
|
Member
Joined: Jul 2008
Posts: 30
From: Warren, MI
yeah wwell do i post do a photoshoot with my 08 fit as soon as i get some mods done to the car!!
thanks agian
thanks agian
Ya that would be cool! My Fit looks stock haha but I don't care I still represent!
