Hey guys, definately parting out the Jazz now.
Here's a list a the parts. For now I will just write up a detailed description of each. Please be patient, as I'm really busy at the moment with University etc, so don't have alot of time to get on here and get quotes etc, will respond to anything as quick as I can.
First come first served.

- BC Racing Coilovers - Had from new for a year, covered about 8000 miles. Rear's have been modded to go super low. Doesn't affect how they ride or work at all, just means you can go about an inch lower than the original max. No springs cut or ghetto mods, simply the adjustable cups which the springs sit on have been cut down.
£410 SHIPPED ANYWHERE IN THE US.



- JDM Pre-MMC Front Bumper with Grille - Has been recently painted, few tiny marks here and there, but nothing that a respray wouldn't fix anyways. Comes with upper grille and emblem. No lip.
£50 +SHIPPING



- USDM Side Skirts - Replica's, but good quality. Mounting Hardward is missing, but it's basically a few screws and brackets, could be picked up cheap or made up.
£30 +SHIPPING



I recently shipped 2 bumpers out to Cali, and it cost around £100GBP for each one in shipping costs. This should give an idea of how much the other bumper would cost in shipping.

EVERYTHING IS NOW OFF THE CAR AND I NEED IT ALL GONE.

Thanks guys!

 

for what year are the sideskirts for? GD?

 

Ill take the depo tails

 

will the front bumper fit on the usdm? If so ill take it.

 

Yes the skirts are for a GD

 

PM'd 10charrr

 

Correct!
GD Skirts, no GE crap in here.

 

kinda sad to see another GD3 owner part out, yet amused at the same time. I assume your ok with doing international shipping?

 

Yeah I'm sad to be leaving the GD scene, but I'll still be on the forum as much as I was!
Yeah I'm fine with shipping overseas.

My Duckbill is up for grabs now if anyone wants it.

 

Pm, has been sent.

 

Updated first post. Still have a few big items! Will work on the prices slightly, shoot me an offer.

 

£40 for the side skirt may worth looking at and see if I can adapt it somehow for my GE.

What do you reckon? Worth the hassle or not?

How much would you do it delivered to Newcastle?

 

Still here guys.
T1R VIP is just sittinghere waiting for a good home!

TBH, I don't think it would be worth the hassle. I have no idea if the skirts are the same length etc, and if they would even fit up against the GE bodywork. Sorry bud.

 

If anyone in Cali picks up that Pre-MMC bumper I have a spoon lip that would look nice on it

free bump!

 

See, for all those wanting to do the JDM conversion, this is a good chance to pick up two of the parts! Thanks for the bump Chris!


On another note, the coils will be £410GBP shipped to ANYWHERE in the US.

 

I'll take the skirts! I might take the bumper as well I live in London too would I be able to come pick them up to save on shipping costs?

 

Pick-up is fine. You will need new mounting hardware for the skirts.
Can get pictures today for you of both skirts and bumper if you are interested.

 

When you say mounting hardware do you mean screws and nuts or is there something else I need? Pics would be great thanks!

 

I just had them mounted at either end with a screw. One screw goes straight into one of the pre-made holes in the front fender liner. The other you will have to drill a small hole and screw into. I then ran silicone sealent along the whole edge of the skirt to keep it attached along the side under the doors. Worked a treat, had them on for over a year like that without any issues.
Will get pics for you later.

 

Just looked at your photo thread and I have the jazz in alabaster silver so will defo be up for the skirts. Is it the same front bumper as you had in the photo thread? If so I will take that too... Looking at the thread I want your coils aswell man I will see what funds I can get together...