Got some JDM rear head rests and Honda Access blue footwell lights.

 

I took my friend for a ride who didn't know I had boosted it. He missed the intercooler but his wife saw it and was going to say something but I stopped her before she ruined the surprise.

 

Almost run the red light while watching the live data on my new Innova scanner

 

Finally installed my Honda Access blue ambient lights today. Since it's daylight, it's hard to tell how they look.

Hopefully they turn out alright at night.

 

Changed my intake set up again for the fifth time. I did the ramair intake. It's actually pretty good and out of the 5 I tried best one hands down in response, top end, mid range, and flow. The filter is similar to spoon sports and is foam, the elbow for the intake is all silicone to keep everything cool. The length is set up just like factory just more free flowing.

 

So I'm new to the fit world and started a valve adjustment. Managed to strip the threads on one rocker arm so can't say its going well.

 

I'm at the dealership for the airbag recall. And a B3 service.

 

Turns out I got got. Dealership told me they had the part, but when they got me kicked out of there after a little less than 2 hours and I was told it would take 3-4 and I asked about it the guy said that I just got an email telling me they ordered the part, not the email that the part was actually in. So, I guess my bad. And he said that the part was backordered into next decade.

 

Got rid of my turn down axelback so it's now for sale, and did a custom exhaust using the 06-09 civic si muffler.

 

Put some pads and neck pillow here for my little buddy, although, he's to short for the neck pillow hahah




Did not install my header, down pipe and rear motor mount yet so, I can't say I did anything to my GD3 today but I'll have them installed soon, when my mechanic returns from vacation.

 

Wasn't done today but wanted to share. Love the throttle sound�� Strut bar has my old 08 FIT emblem gorilla glued on.




Planning on adding a Goku sticker onto the pipe and call it my Goku intake because each time I rev up, I imagine Goku screaming to power up to super sayian lolol hahah




I restored the gloss and shine, looks amazing after starring at the yellow for so long hahah

 

The header and resonated test pipe is a pretty simple install. I WILL recommend getting a O2 simulator/defouler/extension with a 90 degree elbow for the rear sensor though.

 

Okay, I found out what it does, I just ordered one with the extension long one piece 90 degree. ��

 

Had the Megan racing down pipe and defouler installed. Whole entire exhaust system complete.��



Just another view of it.



DNA motor sport header installed onto down pipe.



Hood Seibon VS2 carbon fiber arrived.



Strapping box down on roof onto the C+B pillar bars.



Hood installed same day but different time of the day.



Just a photo with box on roof. I want mean looking eyelids now. ��

 

Had the Megan racing down pipe and defouler installed. Whole entire exhaust system complete.😎



Just another view of it.



DNA motor sport header installed onto down pipe.



Hood Seibon VS2 carbon fiber arrived.



Strapping box down on roof onto the C+B pillar bars.



Hood installed same day but different time of the day.



Just a photo with box on roof. I want mean looking eyelids now. 😜

 

No lie... I think I kinda want your hood. How have you noticed any differences with under hood temps with it on yet?

 

Not sure yet hootie, just installed everything today but while sitting in the car at red light or just parked after driving, I do see heat waves exiting the hood. Hope that helps hehehif you want the hood, better quickly, before it runs out. I heard Seibon isn't making anymore for the GD3. Really I was waiting for my VIS terminator hood but after 6 months waiting, they kept telling me something is wrong with the mold. So I asked the seller at nrgmotortrend, is their another option I can choose from? He told me Seibon has oem, vs2, and DS Carbon hoods in stock, so I chose vs2. A little disappointed but I'm happy now that I got my hood. Ohs, do you have a face book? If so let me have it so I can have you join this group on face book where there is a large Fit community.

 

I'm not usually a fan of aftermarket hoods, but that looks good, probably because the whole car looks pretty well-executed in the style it's going for.

 

Thanks man, appreciate the compliment. You just made my entire day become awesome heheh

 

I like that X-bar set-up!