Unofficial Honda FIT Forums
Share Your Pictures with Our Community. Upload Now
Another view of the 15-inchers.
Another view of the 15-inchers.
0 2009/07/19 04:57:34
This is what it looks like under the stock 15" Sport wheel. Same problem here. The caliper just touches the inside of the wheel. Need the 3-mm spacers and longer studs...sigh!
This is what it looks like under the stock 15" Sport wheel. Same problem here. The caliper just touches the inside of the wheel. Need the 3-mm spacers and longer studs...sigh!
0 2009/07/19 04:56:04
This how it looks under a 16" accessory wheel. BUT, there is not room between the caliper and the wheel. Need to install 3-mm wheel spacers and longer studs...so close, yet so far!
This how it looks under a 16" accessory wheel. BUT, there is not room between the caliper and the wheel. Need to install 3-mm wheel spacers and longer studs...so close, yet so far!
0 2009/07/19 04:54:09
This is with the Axxis UTL pads and Type-R caliper. This caliper was gotten from http://store.zeckhausen.com/catalog/product_info.php?cPath=159_553_1550_1551&products_id=4349 for only $79! How is that for a cheap upgrade?
This is with the Axxis UTL pads and Type-R caliper. This caliper was gotten from http://store.zeckhausen.com/catalog/product_info.php?cPath=159_553_1550_1551&products_id=4349 for only $79! How is that for a cheap upgrade?
0 2009/07/19 04:51:58
This is with a StopTech full floating disc installed and Type-R caliper bracket. The StopTech discs are very nice with aluminum hat section (center). I got them from http://store.zeckhausen.com/catalog/product_info.php?cPath=159_553_1550_1552&products_id=4347 An even cheaper version would be to install Spoon discs http://www.spoonsports.us/ProductDetails.asp?ProductCode=45251-4H1014. I chose the StopTech ($450) because they are 25-mm wide and the Spoon ($197) is 23-mm wide. both discs are 282-mm in diameter. Stock diameter is 262-mm.
This is with a StopTech full floating disc installed and Type-R caliper bracket. The StopTech discs are very nice with aluminum hat section (center). I got them from http://store.zeckhausen.com/catalog/product_info.php?cPath=159_553_1550_1552&products_id=4347 An even cheaper version would be to install Spoon discs http://www.spoonsports.us/ProductDetails.asp?ProductCode=45251-4H1014. I chose the StopTech ($450) because they are 25-mm wide and the Spoon ($197) is 23-mm wide. both discs are 282-mm in diameter. Stock diameter is 262-mm.
0 2009/07/19 04:41:10
This is with a stock replacement StopTech sloted disc (P/N 126.40021SR). This was a huge upgrade over the stock pancakes. But this was still not enough for me. So,this is what I will upgrate to Type-R brake system. This is my start point.
This is with a stock replacement StopTech sloted disc (P/N 126.40021SR). This was a huge upgrade over the stock pancakes. But this was still not enough for me. So,this is what I will upgrate to Type-R brake system. This is my start point.
0 2009/07/19 04:35:58
compressed fit
compressed fit
0 2009/07/14 21:20:30
Fit 001
Fit 001
0 2009/07/14 14:05:53
I decided to put the LED on the side of my gauge so it can blind me when the kit turns on.... awesome, right?
I decided to put the LED on the side of my gauge so it can blind me when the kit turns on.... awesome, right?
0 2009/07/14 05:23:24
solenoid (and some wires all over the place..) so methanol does not leak into intake when not in use because of the long line for the trunk mount. It's mounted up behind that compartment where i put my cigarettes, i dunno what to call it. wires are all hidden now. And the Timer is back in place... not just hanging on the floor like in the pic...
solenoid (and some wires all over the place..) so methanol does not leak into intake when not in use because of the long line for the trunk mount. It's mounted up behind that compartment where i put my cigarettes, i dunno what to call it. wires are all hidden now. And the Timer is back in place... not just hanging on the floor like in the pic...
0 2009/07/14 05:17:47
Mounted tank n pump in the back of the fit because there wasn't much room elsewhere
Mounted tank n pump in the back of the fit because there wasn't much room elsewhere
0 2009/07/14 05:17:47
Where i decided to put the nozzle.
Where i decided to put the nozzle.
0 2009/07/14 05:17:47
Advertisement
Copy of IMG 0004
Copy of IMG 0004
0 2009/07/12 21:45:06
IMG 0008
IMG 0008
0 2009/07/12 21:45:06
IMG 0988
IMG 0988
0 2009/07/12 21:45:06
009
009
0 2009/07/12 13:28:29
008
008
0 2009/07/12 13:23:44
First decals for my Fit! Dunno if the rainbow squiggle is gonna stay, since I'm planning on taking off the FIT emblem...
First decals for my Fit! Dunno if the rainbow squiggle is gonna stay, since I'm planning on taking off the FIT emblem...
0 2009/07/10 12:58:22
IMG 1396
IMG 1396
0 2009/07/08 23:06:18
IMG 1397
IMG 1397
0 2009/07/08 23:06:18
0 2009/07/07 16:59:36
0 2009/07/07 16:56:09
0 2009/07/07 16:56:09
0 2009/07/07 16:56:09
tn
tn
0 2009/07/07 14:07:35
0 2009/07/07 12:45:47
Bout to drive my new Blackberry Pearl Fit Sport home!
Bout to drive my new Blackberry Pearl Fit Sport home!
0 2009/07/05 23:38:49
My purple Fit Sport, hanging out in the sun in front of the house
My purple Fit Sport, hanging out in the sun in front of the house
0 2009/07/05 23:38:49
Front Passenger's Side
Front Passenger's Side
0 2009/07/05 08:46:18
Rear Mats (My GPS mount on the hump)
Rear Mats (My GPS mount on the hump)
1 2009/07/05 08:46:18
Front Driver's Side
Front Driver's Side
0 2009/07/05 08:46:18
DIY Cargo Mat (Carpet side up)
DIY Cargo Mat (Carpet side up)
0 2009/07/05 08:43:34
Advertisement