Unofficial Honda FIT Forums
Share Your Pictures with Our Community. Upload Now
0 2025/06/17 10:27:04
0 2025/06/17 10:26:56
0 2025/06/17 10:26:48
0 2025/06/17 10:26:41
0 2025/06/17 10:26:34
0 2025/06/17 10:26:26
80$ CDN on Amazon. Works like a charm.
80$ CDN on Amazon. Works like a charm.
0 2025/06/16 22:17:35
After
After
0 2025/06/16 20:25:35
Before
Before
0 2025/06/16 20:24:42
I like it, tbh. Understated, as opposed to the ones that protrude lots and demand attention. I’m all about the subtle bits.
I like it, tbh. Understated, as opposed to the ones that protrude lots and demand attention. I’m all about the subtle bits.
0 2025/06/16 17:06:06
0 2025/06/16 05:13:28
0 2025/06/15 13:24:00
Advertisement
20 % CERAMIC TINT ALL AROUND
20 % CERAMIC TINT ALL AROUND
0 2025/06/15 12:26:05
20 % CERAMIC TINT ALL AROUND
20 % CERAMIC TINT ALL AROUND
0 2025/06/15 12:06:30
Steering wheel needs replaced or re-wrapped
Steering wheel needs replaced or re-wrapped
0 2025/06/15 09:15:12
0 2025/06/14 08:44:28
0 2025/06/12 01:35:19
Left hand screw is in a very tight space between the resistor plug block and a plastic device on the left. Had to keep switching between different mini stubby Phillips screwdrivers
Left hand screw is in a very tight space between the resistor plug block and a plastic device on the left. Had to keep switching between different mini stubby Phillips screwdrivers
0 2025/06/12 01:35:12
Here it is complete with all brackets and seatbelt swap. I forgot to take a picture of a bracket that is also bolted on the middle from track to track. You will need to remove it as well, as it hits our duct that's on the floor.
Here it is complete with all brackets and seatbelt swap. I forgot to take a picture of a bracket that is also bolted on the middle from track to track. You will need to remove it as well, as it hits our duct that's on the floor.
0 2025/06/11 15:46:31
0 2025/06/11 15:41:28
Front bracket covers
Front bracket covers
0 2025/06/11 15:40:02
Rear bracket covers. I'm gluing a broken clip on the rear seat cover, that's why it's off.
Rear bracket covers. I'm gluing a broken clip on the rear seat cover, that's why it's off.
0 2025/06/11 15:39:30
The rear outer bracket has to be slightly enlarged as it doesn't line up properly.
The rear outer bracket has to be slightly enlarged as it doesn't line up properly.
0 2025/06/11 15:34:14
Something like this
Something like this
0 2025/06/11 15:33:26
Here it is complete with all brackets and seatbelt swap. I forgot to take a picture of a bracket that is also bolted on the middle from track to track. You will need to remove it as well, as it hits our duct that's on the floor.
Here it is complete with all brackets and seatbelt swap. I forgot to take a picture of a bracket that is also bolted on the middle from track to track. You will need to remove it as well, as it hits our duct that's on the floor.
0 2025/06/11 15:31:14
You'll be left with this.
You'll be left with this.
0 2025/06/11 15:30:36
The Si seat also has these bracket riveted in, you only need to remove the inner one, as it doesn't let the seat rest properly in the fit.
The Si seat also has these bracket riveted in, you only need to remove the inner one, as it doesn't let the seat rest properly in the fit.
0 2025/06/11 15:29:32
Just like this
Just like this
0 2025/06/11 15:28:23
The front brackets have rivets, so you need to drill em out. I made the holes slightly bigger to use an M8 button head allen bolt. You can see the bottom hole does not align so you will need to enlarge it a bit.
The front brackets have rivets, so you need to drill em out. I made the holes slightly bigger to use an M8 button head allen bolt. You can see the bottom hole does not align so you will need to enlarge it a bit.
0 2025/06/11 15:26:18
I removed the Si rear brackets with this 13mm socket, I just hammered it in and used my impact drill. These bolts are pressed into the seat track and I reused the nuts.
I removed the Si rear brackets with this 13mm socket, I just hammered it in and used my impact drill. These bolts are pressed into the seat track and I reused the nuts.
0 2025/06/11 15:25:00
Installed in the Si seat
Installed in the Si seat
0 2025/06/11 15:21:19
Opened up the housings and swapped the internals.
Opened up the housings and swapped the internals.
0 2025/06/11 15:20:31
Advertisement