Unofficial Honda FIT Forums
Installed in the Si seat
Installed in the Si seat
0 2025/06/11 15:21:19
I removed the Si rear brackets with this 13mm socket, I just hammered it in and used my impact drill. These bolts are pressed into the seat track and I reused the nuts.
I removed the Si rear brackets with this 13mm socket, I just hammered it in and used my impact drill. These bolts are pressed into the seat track and I reused the nuts.
0 2025/06/11 15:25:00
The front brackets have rivets, so you need to drill em out. I made the holes slightly bigger to use an M8 button head allen bolt. You can see the bottom hole does not align so you will need to enlarge it a bit.
The front brackets have rivets, so you need to drill em out. I made the holes slightly bigger to use an M8 button head allen bolt. You can see the bottom hole does not align so you will need to enlarge it a bit.
0 2025/06/11 15:26:18
Just like this
Just like this
0 2025/06/11 15:28:23
The Si seat also has these bracket riveted in, you only need to remove the inner one, as it doesn't let the seat rest properly in the fit.
The Si seat also has these bracket riveted in, you only need to remove the inner one, as it doesn't let the seat rest properly in the fit.
0 2025/06/11 15:29:32
You'll be left with this.
You'll be left with this.
0 2025/06/11 15:30:36
Here it is complete with all brackets and seatbelt swap. I forgot to take a picture of a bracket that is also bolted on the middle from track to track. You will need to remove it as well, as it hits our duct that's on the floor.
Here it is complete with all brackets and seatbelt swap. I forgot to take a picture of a bracket that is also bolted on the middle from track to track. You will need to remove it as well, as it hits our duct that's on the floor.
0 2025/06/11 15:31:14
Something like this
Something like this
0 2025/06/11 15:33:26
The rear outer bracket has to be slightly enlarged as it doesn't line up properly.
The rear outer bracket has to be slightly enlarged as it doesn't line up properly.
0 2025/06/11 15:34:14
Rear bracket covers. I'm gluing a broken clip on the rear seat cover, that's why it's off.
Rear bracket covers. I'm gluing a broken clip on the rear seat cover, that's why it's off.
0 2025/06/11 15:39:30
Front bracket covers
Front bracket covers
0 2025/06/11 15:40:02
0 2025/06/11 15:41:28
Here it is complete with all brackets and seatbelt swap. I forgot to take a picture of a bracket that is also bolted on the middle from track to track. You will need to remove it as well, as it hits our duct that's on the floor.
Here it is complete with all brackets and seatbelt swap. I forgot to take a picture of a bracket that is also bolted on the middle from track to track. You will need to remove it as well, as it hits our duct that's on the floor.
0 2025/06/11 15:46:31
0 2025/06/24 10:56:37
0 2025/07/03 09:09:27
This is the part number, I got mine from the junkyard along with the light and harness.
This is the part number, I got mine from the junkyard along with the light and harness.
0 2025/12/18 18:04:44
0 2025/12/18 18:06:54
0 2025/12/18 18:12:48
0 2025/12/18 18:13:56
0 2025/12/18 18:15:24
Not the prettiest but it works.
Not the prettiest but it works.
0 2025/12/18 18:16:28
0 2025/12/18 18:19:18
0 2025/12/18 18:39:02
0 2025/12/18 18:42:12
0 2025/12/18 18:42:43
0 2025/12/18 18:43:35
Much better
Much better
0 2025/12/18 18:45:19
0 2025/12/19 08:15:54
0 2025/12/26 16:02:55
0 2025/12/26 16:03:04
0 2025/12/26 16:03:27
These are the covers you'll need. These are not included in the sale. lights only!!!
These are the covers you'll need. These are not included in the sale. lights only!!!
0 2025/12/26 16:03:38
0 2025/12/26 16:04:22
TPMS light on
TPMS light on
0 2026/03/17 10:47:35
Stock and 9thgenee TPMSD
Stock and 9thgenee TPMSD
0 2026/03/17 10:47:39
9thgenee TPMSD inside stock TPMS box
9thgenee TPMSD inside stock TPMS box
0 2026/03/17 10:47:42
0 2026/03/17 10:47:45