Ultra Racing Fender Bars

September 13, 2009

6

0

Description:
This is what it takes to install the Fender Bars.

Read more »

Right Front Fender Bar installed

Right Front Fender Bar installed

0 2009/09/13 13:31:38 Jodele

I put shims (gotten at Home Depot) under the closed door to hold the door in place while all four hinge bolts were removed to install the fender bar. I never opened the door after removing the bolts.

I put shims (gotten at Home Depot) under the closed door to hold the door in place while all four hinge bolts were removed to install the fender bar. I never opened the door after removing the bolts.

0 2009/09/13 13:32:20 Jodele

I bent a coat hanger to form a holder for the flange nut.

I bent a coat hanger to form a holder for the flange nut.

0 2009/09/13 13:35:01 Jodele

I then taped the nut to the formed coat hanger with aluminum tape. In aviation it is called speed tape. This holds the nut to the coat hanger and when the bolt is screwed in, the tape comes off.

I then taped the nut to the formed coat hanger with aluminum tape. In aviation it is called speed tape. This holds the nut to the coat hanger and when the bolt is screwed in, the tape comes off.

0 2009/09/13 13:35:57 Jodele

I drilled the far hole with an 8-mm drill through the sheet metal and inserted the nut through an existing body hole like this.

I drilled the far hole with an 8-mm drill through the sheet metal and inserted the nut through an existing body hole like this.

0 2009/09/13 13:37:37 Jodele

0 2009/09/13 13:39:15 Jodele