Unofficial Honda FIT Forums
DRL/Fog garnish for GK 2015-2017
DRL/Fog garnish for GK 2015-2017
0 2018/07/06 07:12:11
DRL/Switchback assembly with lens cover and lense removed. Held in by buytl glue
DRL/Switchback assembly with lens cover and lense removed. Held in by buytl glue
0 2018/07/06 07:12:20
DRL/Switchback assembly
DRL/Switchback assembly
0 2018/07/06 07:12:26
~6500k on the left and ~8500k on the right these units come stock with
~6500k on the left and ~8500k on the right these units come stock with
0 2018/07/06 10:19:05
A little soldering and we are back in business!
A little soldering and we are back in business!
0 2018/07/06 10:19:12
0 2018/07/06 14:06:25
Mini projector installed. It fits right through the glare shield. It touches it but does not push on it or cause interference.
Mini projector installed. It fits right through the glare shield. It touches it but does not push on it or cause interference.
0 2018/07/06 14:09:22
Projector pic 02
Projector pic 02
0 2018/07/06 14:09:30
Low beam with projector fog light. Slight mismatch of color temp but not bad.
Low beam with projector fog light. Slight mismatch of color temp but not bad.
0 2018/07/06 14:13:36
High beam only
High beam only
0 2018/07/06 14:13:44
Low beam without fogs.
Low beam without fogs.
0 2018/07/06 14:13:50
Rear illuminated sills
Rear illuminated sills
0 2018/07/14 17:56:54
Front sills and footwell lighting
Front sills and footwell lighting
0 2018/07/14 17:57:00
Bracket nestled under the ground wires where they are out of the way.
Bracket nestled under the ground wires where they are out of the way.
0 2018/07/30 19:09:33
Took an L bracket, drilled a hole. Used a stainless M6 x 1.00 by 12mm allen head bolt with washer.
Took an L bracket, drilled a hole. Used a stainless M6 x 1.00 by 12mm allen head bolt with washer.
0 2018/07/30 19:09:44
Whole setup
Whole setup
0 2018/07/30 19:09:57
2018+ Audio Connector A, 24 pin Part 01
2018+ Audio Connector A, 24 pin Part 01
0 2018/10/03 11:01:37
2018+ Audio Connector A, 24 Pin, Part 02
2018+ Audio Connector A, 24 Pin, Part 02
0 2018/10/03 11:02:03
0 2018/10/04 18:06:33
0 2019/04/10 17:13:51
0 2019/04/10 17:14:10
0 2019/05/09 11:12:51
0 2019/05/17 09:25:38
0 2019/05/17 09:26:00
0 2019/05/17 09:26:17
0 2019/08/25 06:18:49
0 2019/08/25 06:19:13
0 2019/08/25 06:22:32
0 2019/08/25 06:25:14
0 2020/02/02 12:49:08
0 2020/02/02 12:49:20
0 2020/02/02 12:49:38
0 2020/02/02 12:49:48
0 2020/02/02 12:50:02
0 2020/02/02 12:50:14
These are the MA809s air fitting too close for comfort to the back of tire.
These are the MA809s air fitting too close for comfort to the back of tire.
0 2020/02/02 12:50:43
~1750lbs of gross weight towing
~1750lbs of gross weight towing
0 2020/02/02 12:54:52
1750lbs or towing weight
1750lbs or towing weight
0 2020/02/02 12:55:06
0 2020/02/02 15:40:25
Tried padding with foam to prevent the banging of the shock agaibst the frame rail, no luck. Plus the ride with the MA777 is SUPER STIFF. It is a shock designed for a small pickup I beleive.
Tried padding with foam to prevent the banging of the shock agaibst the frame rail, no luck. Plus the ride with the MA777 is SUPER STIFF. It is a shock designed for a small pickup I beleive.
0 2020/02/08 14:31:07