Unofficial Honda FIT Forums
Started the new bearing by placing the old one on top of it and going around with a standard 2lb claw hammer knocking it a little at a time. Finished using 1-1/16 socket and a 49oz dead blow rubber mallet. If I kept using the old bearing it might've gotten stuck in the pulley with the new one. Though the image shows the drive side of the socket being up, i flipped it for hammering, placing the drive side against the bearing. Seemed flatter/safer
Started the new bearing by placing the old one on top of it and going around with a standard 2lb claw hammer knocking it a little at a time. Finished using 1-1/16 socket and a 49oz dead blow rubber mallet. If I kept using the old bearing it might've gotten stuck in the pulley with the new one. Though the image shows the drive side of the socket being up, i flipped it for hammering, placing the drive side against the bearing. Seemed flatter/safer
0 2022/03/17 19:02:14
Not a plug, but an example.
Not a plug, but an example.
0 2022/04/23 14:12:12
0 2022/04/26 06:36:06
0 2022/04/30 07:47:20
0 2022/04/30 07:47:33
Unbolt these two bolts and move this plastic whatsit off to your right. Kinda hidden in there. This doesn't disconnect anything, so you can run the car and then pinch the hose there..
Unbolt these two bolts and move this plastic whatsit off to your right. Kinda hidden in there. This doesn't disconnect anything, so you can run the car and then pinch the hose there..
0 2022/04/30 07:47:52
0 2022/05/10 13:22:25
0 2022/06/25 20:27:18
0 2022/06/30 07:26:13
0 2022/07/10 09:42:16
0 2022/07/10 09:43:31
Unbolt and slide to *your* right to unhook. Will have to hold this plastic wire routing bracket out of the way for access/visibility
Unbolt and slide to *your* right to unhook. Will have to hold this plastic wire routing bracket out of the way for access/visibility
0 2022/07/10 09:43:36
It's a tight squeeze!
It's a tight squeeze!
0 2022/07/10 09:43:41
also, here's a baby toad we found on our back patio. Life's kinda suckin' right now, but this makes up for a lot.
also, here's a baby toad we found on our back patio. Life's kinda suckin' right now, but this makes up for a lot.
0 2022/07/21 20:09:22
0 2022/08/09 04:56:57
0 2022/08/10 10:36:07
0 2022/08/12 20:25:44
0 2022/09/15 11:42:55
Side by side with a new plug for reference
Side by side with a new plug for reference
0 2022/09/15 11:43:24
0 2022/09/15 11:44:09
0 2022/09/15 11:44:26
0 2022/09/15 11:45:46
You can see here that the crush washer was quite thoroughly compressed on the old plug.
You can see here that the crush washer was quite thoroughly compressed on the old plug.
0 2022/09/15 11:53:38
*0-50 ftlbs
*0-50 ftlbs
0 2022/09/15 14:08:13
0 2022/09/18 14:34:33
0 2022/09/18 14:34:49
0 2022/09/18 14:35:00
0 2022/09/18 14:38:25
0 2022/10/08 17:20:21
0 2022/10/08 17:41:07
0 2022/10/10 07:10:51
0 2022/10/10 07:12:29
This is wire harness routing bracket is in the way.
This is wire harness routing bracket is in the way.
0 2022/10/10 07:12:37
0 2022/10/11 07:19:12
0 2022/10/21 14:20:44
0 2022/10/21 14:21:09
0 2022/10/21 14:22:04
0 2022/10/21 14:22:50
0 2022/10/21 14:23:02
0 2022/10/21 14:23:14