Unofficial Honda FIT Forums
0 2020/08/22 11:16:05
0 2020/08/22 11:15:32
0 2020/08/22 11:13:39
right side is pedal to the floor
right side is pedal to the floor
0 2020/08/05 09:25:53
0 2020/06/27 09:48:44
Green dots indicate wires going to the battery, white to an on/off switch that ran directly to the remote control transmitter, yellow went to the one of the four mini tabs on the motor where I formerly had ground from the battery, and blue went to the other three tabs on said motor, one of which formerly had power (allowed testing the motor to see if it functioned)
Green dots indicate wires going to the battery, white to an on/off switch that ran directly to the remote control transmitter, yellow went to the one of the four mini tabs on the motor where I formerly had ground from the battery, and blue went to the other three tabs on said motor, one of which formerly had power (allowed testing the motor to see if it functioned)
0 2020/04/17 18:27:11
0 2020/04/17 18:23:00
0 2020/04/17 06:57:44
0 2020/04/16 09:46:20
0 2020/04/02 05:35:10
0 2020/04/02 05:34:40
0 2020/04/02 05:33:56
which one is it here?
which one is it here?
0 2020/03/18 20:45:44
is it this?..
is it this?..
0 2020/03/18 20:45:34
0 2020/02/22 18:50:59
Older sparco wheels, "Blue sensation". stock ride height, 16x7 added a whole lot of stability. I view the upgrade as a safety issue.
Older sparco wheels, "Blue sensation". stock ride height, 16x7 added a whole lot of stability. I view the upgrade as a safety issue.
0 2019/12/23 14:19:26
0 2019/09/04 13:42:40
this area is hard to seat. requires firm pressure.
this area is hard to seat. requires firm pressure.
0 2019/08/02 08:13:13
this screw probably ripped out of the plastic. if so, no big deal. the big flat screw head can still hold the plastic in place once you get it re-seated.
this screw probably ripped out of the plastic. if so, no big deal. the big flat screw head can still hold the plastic in place once you get it re-seated.
0 2019/08/02 08:09:46
apply firm pressure here to get those lousy tabs back in. then while holding pressure (assuming that your bumper may be somewhat misshapen now) put that screw back in. it has a big pan head on it, so it should provide some grab even of it did rip out.
apply firm pressure here to get those lousy tabs back in. then while holding pressure (assuming that your bumper may be somewhat misshapen now) put that screw back in. it has a big pan head on it, so it should provide some grab even of it did rip out.
0 2019/08/01 21:31:39
Unscrew here.
Unscrew here.
0 2019/08/01 21:31:15
0 2019/08/01 12:42:20
0 2019/08/01 12:42:13
0 2019/08/01 12:41:59
0 2019/08/01 12:41:51
0 2019/08/01 12:40:50
0 2019/08/01 12:40:40
0 2019/08/01 12:40:07
0 2019/08/01 12:39:49
0 2019/07/23 15:30:27
0 2019/07/15 18:01:55
0 2019/07/06 21:08:41
- Bill Watterson
- Bill Watterson
0 2019/06/06 00:30:38
0 2019/06/02 11:58:04
0 2019/05/27 23:33:24
0 2019/05/26 15:07:54
Cylinder with ejected plug
Cylinder with ejected plug
0 2019/05/25 23:12:39
0 2019/05/09 14:21:16
0 2019/05/09 14:21:11
0 2019/05/09 14:21:05