Quote:
Originally Posted by smirff07
where can i buy camber bolts?
|
You can go to Honda Parts Dept-
Ask for the pinch bolts that allow front camber adjustment:
Honda Part number 90188-SCC-A00
Each about $4.77
You can use 1 or 2 each for right and for left. Maximum adjustment- use a total of four, otherwise 2 (one each side)
I used 2 for each side and got front camber -0.7 to -0.9 range vs -0.2 to -0.3 with stock bolts.
These bolts are size thread and length as stock but have slightly smaller diameter in the middle of the bolt which allows for a little adjustment.
After alignment using these bolts in the front-
Front camber -0.8 deg (right), -0.7 deg (left) [Stock setting + or - 1.0 degrees]
Front toe -0.11 (right), -0.12 (left) (Toe out) [Stock setting -0.12 to 0.12 degrees]
Caster 3.2 deg (right), 3.5 deg (left) [Stock setting 2.8 to 4.8 degrees]
Rear camber -1.8 deg (right), -1.7 deg (left) [Stock setting -0.5 to -2.5 degrees]
Rear toe 0.08 (right), 0.18 (left) (Toe in), [Stock setting 0.0 to 0.20 degrees]
Note- There were limits for adjustments on my Fit and this was the best the alignment shop could do.
(edit: The above part number is correct for USA Honda)
Or you can get a camber bolt kit for about $29 (one for each side)
Club RSX.com: SPC Front Camber Kit (Pair)