Need constant power and ignition

taddyangle · #1 (**permalink**) 08-03-2009, 06:14 PM

I have a 2009 base FIT. I am trying to install a GPS tracking device and need to tap into a continuous power supply and the ignition wire. I would like some advise on how to best do this. Any ideas?

I am thinking that the best way would be to get a wiring diagram and access via the wires in the steering column.

I also need ground, but I can get that from the chassis.

rosswond · #2 (**permalink**) 08-03-2009, 11:44 PM

Quote:

Originally Posted by taddyangle

I have a 2009 base FIT. I am trying to install a GPS tracking device and need to tap into a continuous power supply and the ignition wire. I would like some advise on how to best do this. Any ideas?

I am thinking that the best way would be to get a wiring diagram and access via the wires in the steering column.

I also need ground, but I can get that from the chassis.

Try the fuse box under the dashboard next to the door on the driver's side. The fuses are referenced in your owner's manual. I think there are some spare locations.