[explosivpotato]

Alright, I'm taking some advice from you guys (and my girlfriend) and taking a day or 2 off from looking at this god forsaken thing. I spent 6 hours yesterday and another 2 today, and I still can't see the problem with the wiring.

So, just for the sake of gathering information, here's what it's doing now:
All cylinders seem to be firing, but it starts, revs up to about 1500 RPM just like a normal cold start, and then quickly chokes out and dies. All told it runs for about 2.5 seconds start to finish.

It fires up quickly, and sounds great until it chokes and dies.

Any ideas as to what to check? I'm starting to feel like a retard what with my consistent failure at installing this damn Emanage. I've tried about 4 different tunes from Ben, and they all do the same thing except for the original tune that came with the kit. THAT tune idles, but it's got a wicked pulse going from 900 to 1100 RPM. However, that tune DOES get into closed loop, so the computer is no longer in limp mode.

Any ideas? I'll probably be spending a lot of time with it this weekend, so I'd like to have a list of stuff to check.