Fit Exterior Modifications & JDM StylingDiscussions about about exterior modifications, body-work, body-kits and JDM body styling
Welcome to Fit Freak!
Welcome to Fit Freak,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
it screws into the tow hook hole. I have a feeling though that it might cover up the fog light.
Nice idea, but too much cost and bother. You can find both plastic and metal license plate relocator mounts on eBay Motors for about $7.00 plus rip off shipping of $11.00 via USPS.
i think that's whack. It will look really wierd sitting in the middle. Just get a license plate relocator from ebay, one that mounts to the underside of the opening of the bumper. U can buy onhe from ebay for <$25 or get the overpriced one from passwordjdm.com. I bought the overpriced one loll but it turns out lookin tight. Check out the sig.
i think that's whack. It will look really wierd sitting in the middle. Just get a license plate relocator from ebay, one that mounts to the underside of the opening of the bumper. U can buy onhe from ebay for <$25 or get the overpriced one from passwordjdm.com. I bought the overpriced one loll but it turns out lookin tight. Check out the sig.
I guess that you did not read my post. The eBay relocators are $7.00 plus shipping, and my license plate is exactly where yours is, except that I didn't cover up the air inlet next to the fog light as you did.
Yeah that's why i said less then $25 TOTAL. I didn't block mine either, its the angle i took that looks like it's blocked but i know about those air channel vents. =]
I only restated the price because they have come down during the time that I was considering buying mine, and I thought that maybe your photo gave the wrong impression of the actual position of your plate. When I first started looking at ways to move my plate (because it was removing the paint from the bumper from wind rattling the plate against the paint), it was last year and the ads on eBay for the plate brackets were around $19.95 or so. I got mine a month ago and was surprised to see that all of the ads, whether for aluminum or plastic, were for the same price.
I'm not hammering on you Kevin- just trying to give complete info. for the guy who originally asked the question.
personally i think you all spend way too much for your liscense plate relocater kit because i just went to home depot bought all the stuff i need for $1.33.
people, just buy flexable metal L brackets and use the stock mounts with a bolt running through them to hold it in place. I wanted to mount it so the plate doesn't touch any paint so it doesn't mess it up. I used wing nuts so i can take off the plate when i wanna look illegal lol.
It's mounted where the stock plate should be but upside down. Cost 4 or 5 bucks for everything.
It took a long time before I noticed how bad the factory plate holder was rubbing the bumper. It took off a huge chunk of paint. I relocated the plate to the tow hook. If I need a respray anyway, should I get an aftermarket front bumper? Any recommendations?
i never like the idea of moving the plates to the side
it just looks out of place.
reason why some ppl do it cuz of the Intercooler, it will restrict flow to FMIC if the plate is in the front, so they move it to the side.
other wise theres no point'
__________________
One Cool Daily Driver
Honda tuning is a LifeStyle
Nissan tuning is to go stupid FAST !
It took a long time before I noticed how bad the factory plate holder was rubbing the bumper. It took off a huge chunk of paint.
Yeah, mine has a big strip of paint rubbed off from the bumper as a result of the stock setup (I assume it's the stock mounting bracket, at least). So I won't be moving my plate anytime soon, I don't feel like getting the bumper repainted.
Not that I have any burning desire to move the plate around, front & center works fine for me.
H-Fit - Honda Fit License Plate Relocation Kit
GD3/GD4/(GE8-SOON!)
H-Fit.com knows the needs for the daily driver in their modified cars. We've been pulled over twice in a week for not displaying our front license plate. No more! Because this mounts onto your front factory tow hook position, no drilled holes are required. Instead of mounting on the lower grill, the front license plate is positioned higher, allowing more air flow to the radiator or front mount intercooler. H-Fit engineered the mounting plate to allow adjustability of the height and tilt for your own preference. Included in this kit are all the necessary parts required, including hardware and the black anodized aluminum mouting plate laser etched with the H-Fit.com logo. Sure you won't be able to see the logo behind the plate, but we'll both know! Also in this kit, we are including 2 license plate frames for your front AND rear license plate. WE <3 OUR FITS!
One Cool Daily Driver 
Linear Mode
