You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I'm installing a kraftwerks base kit into my 07 fit 5 speed and have gotten to the part where I need to bend the brake lines out of the way. Can anyone give me some advice on this part of the install? I've bent the two first lines (The smaller ones) and I'm on the larger ones now that go to the rear brakes. I was running out of daylight so I've given up until tomorrow.
Just to update the thread, a friend of mine who works in heavy duty mechanics came over and bent the remaining lines for me. I was amazed at how much you could bend those things. I just finished the install yesterday and I'd recommend for anyone doing the install to remove the passenger axle and work from underneath the car. It made the install pretty simple.
All rights reserved. FitFreak is a registered trademark of KART Media, LLC. FitFreak is not sponsored, endorsed, affiliated or authorized by American Honda Motor Co. Ltd., it's parent or subsidiaries. American Honda Motor Co. Ltd. trademarks are used solely for descriptive purposes and KART Media, LLC. assumes no ownership nor right of commercial use.
Legal Disclaimer: FitFreak.net contains information that is created and maintained by its
members. The site contains the personal opinions and other expressions of
the members who post the entries and does not reflect the views of
FitFreak.net or its employees. FitFreak.net does not control, monitor
or guarantee the information contained in this site or information
contained in links to other external web sites, and does not endorse any
views expressed or products or services offered therein. In no event shall
FitFreak.net be responsible or liable, directly or indirectly, for any
damage or loss caused or alleged to be caused by or in connection with the
use of or reliance on any such content, goods, or services available on or
through this site.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Fitfreak.net content, comments, or advertising. Fitfreak.net is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Fitfreak.net in any way. Copyright/trademark/sales mark infringements are not intended or implied.