16x8 +10 offset???

revd34 · #1 (**permalink**) 10-10-2009, 06:48 AM

i want to get some rims that are 16x8 +10 offset. i'm also thinking about 16x7 +0 offset my question is:

1. i already tuck the fender liner in the front and cut and rolled the rear fenders. will i need to do anything else to make them fit? like camber or anything like that

2. will 225/50/16 be an ok size? what size would you guys recommend?

rvall004 · #2 (**permalink**) 10-10-2009, 11:07 AM

lots and lots of camber...lmao

Fit4Trav · #3 (**permalink**) 10-14-2009, 05:52 PM

I would recommend a 195/45 tire to get some stretch and help with rubbing.

I had 15x7 +13 and they stuck out from the fender a little.

GD3_Wagoon · #4 (**permalink**) 10-14-2009, 07:23 PM

IIRC, bradthree is running 16x8 ssr professors -- at least he was the last time i saw him. even with lots of fender work his rears slice into the already stretched tire wall. you're going to need a good amount of camber to offset that kind of fitment

honda_david · #5 (**permalink**) 10-18-2009, 08:30 AM

Quote:

Originally Posted by revd34

i want to get some rims that are 16x8 +10 offset. i'm also thinking about 16x7 +0 offset my question is:

1. i already tuck the fender liner in the front and cut and rolled the rear fenders. will i need to do anything else to make them fit? like camber or anything like that

2. will 225/50/16 be an ok size? what size would you guys recommend?

no to 225/50/16..you're gonna rub way too much on 16" with that 50..decrease the number to 45 or 40. it'll make a huge difference between 50 to 45.