Testing water on 3 Drive Throttle Controller for GE6-GE9 - Page 3

Texas Coyote · #41 (**permalink**) 10-25-2009, 03:19 PM

Quote:

Originally Posted by twpanson

The MSRP of our kit is $180 shipped, Group Buy Pricing is as follows:
1~8 sets: US$150 shipped to lower US 48 states
9~16 sets: US$140 shipped to lower US 48 states
16~ sets: US$130 shipped to lower US 48 states

There has to be 16 people here that can appreciate all that this little jewel can do to enhance whatever kind of driving you are in the mood for, especially for $130.00 shipped to the lower 48..... If we have 16 buyers in the group and can get that price you guys sitting on the fence not totally sure about it that make up your minds too late will be paying more when you do and think about money saved in eco mode on fuel in addition to having a throttle that completely opens in sport mode and does so with much quicker response..... You northerners can benefit a lot on the ice and snow in eco mode and possibly not get into situation where you get stuck or worse..... If you have to let someone use your car and don't want it driven fast or abused hiding the unit under the dash in eco will insure they can't drive faster than you would like...... If for no other reason buy one to help me save $20.00 dollars.... It would help me out a lot when my wife starts her nit picking about what I spend on my car and your good deed would bring you good karma and be extremely appreciated.

Scratch&Dent · #42 (**permalink**) 10-25-2009, 05:11 PM

I already have a Blitz controller. IT WORKS!!! It works even better with 93 octane fuel. I'm considering one of these for a friend with a GE, but I'm not clear on some details (see earlier post).

Rocks A GD3 · #43 (**permalink**) 10-25-2009, 05:37 PM

interested.

TurboManGT · #44 (**permalink**) 10-25-2009, 05:59 PM

Quote:

Originally Posted by Scratch&Dent

I already have a Blitz controller. IT WORKS!!! It works even better with 93 octane fuel. I'm considering one of these for a friend with a GE, but I'm not clear on some details (see earlier post).

From what I read if it is not connected to OBD port it doesn't get power to the unit

JDMchris.com · #45 (**permalink**) 10-25-2009, 07:04 PM

why would you run it not connected?

Scratch&Dent · #46 (**permalink**) 10-25-2009, 08:24 PM

Check out a CEL, connect a ScanGauge, it might be in the shop (j/k, no really). I just wonder if it will function like stock or if the drive-by-wire stops working altogether.

twpanson · #47 (**permalink**) 10-26-2009, 01:16 AM

Quote:

Originally Posted by Scratch&Dent

Check out a CEL, connect a ScanGauge, it might be in the shop (j/k, no really). I just wonder if it will function like stock or if the drive-by-wire stops working altogether.

Sir, no worry. Our device has safety bypass switch integrated in the unit. If there is a glitch or power outage w/ the device, it will automatically bypass the signal back to OEM factory mode.

Panson

twpanson · #48 (**permalink**) 10-26-2009, 10:58 AM

Vendor status registered. Pending approval to launch the 1st group buy.

Panson

Scratch&Dent · #49 (**permalink**) 10-26-2009, 01:20 PM

Cool. I will let them know. Probably count one more here.

twpanson · #50 (**permalink**) 10-26-2009, 02:48 PM

Have I ever mentioned that our kit is universal toward several import make and models. The only difference is just the wire connector. If you could get more people join this group buy, you all are gonna benefit for better price.

Followings are the compatible list I personally created. (Original list has lots of JDM models that never been seen in states)

twpanson · #51 (**permalink**) 10-26-2009, 05:42 PM

Just to clarify some confusing part about connector. Thanks for one of the experienced Fit owner's assistance.

NTD Controller can be used along with a Scan gauge or other OBDport connected device, but you need to buy a cable splitter for that to work properly.

Panson

Texas Coyote · #52 (**permalink**) 10-26-2009, 07:04 PM

Great....I was almost sure that could be done from other post I've read in the past..... I'm just waiting to hear how to go about the group buy transaction..... I had considered purchasing one of the other T/Cs and glad that I waited.....Maybe waiting a little longer will result in more people getting in on this group buy and bring the price a bit lower.

holokai · #53 (**permalink**) 10-26-2009, 07:24 PM

Interested. Will check this thread later when I'm on a network that doesn't block the pictures :P How much is shipping to Hawaii (96825)?

ekonetics · #54 (**permalink**) 10-27-2009, 01:31 AM

I would be interested in one.

holokai · #55 (**permalink**) 10-27-2009, 03:22 AM

Quote:

Originally Posted by twpanson

Just for future reference, Chris has 08 GD3 L15 which uses the same connector as 8th Civic.

Panson

Just to clarify our fits will use the following connectors (JDMChris, please correct me if I'm wrong since you're the only one with actual hands on experience with the product:

07-08 (GD3): Harness No. 4A

09+ (GE8): Harness No. 7A

Hopefully this makes it easier for anyone ordering this throttle controller. Count me in on the GB.

holokai · #56 (**permalink**) 10-27-2009, 03:26 AM

I don't mean to thread jack but we might as well start a list to see what kind of interest there is (only put myself first because I don't want to speak for anyone else). . .

1. holokai (harness 4A, ship to 96825)
2. ???

JDMchris.com · #57 (**permalink**) 10-27-2009, 04:45 AM

Quote:

Originally Posted by holokai

Just to clarify our fits will use the following connectors (JDMChris, please correct me if I'm wrong since you're the only one with actual hands on experience with the product:

07-08 (GD3): Harness No. 4A

09+ (GE8): Harness No. 7A

Hopefully this makes it easier for anyone ordering this throttle controller. Count me in on the GB.

this is correct

twpanson · #58 (**permalink**) 10-27-2009, 02:58 PM

I don't know why I still don't the permission to post on group buy thread. (I tried both vendor section, not allowed) Just let me post here and I will transfer whole thing toward group buy section later on.

Panson

twpanson · #59 (**permalink**) 10-27-2009, 03:00 PM

Okay, here is the deal

After testing the market and knowing the need for our NA legacy members, we now officially offer our 1st group buy for NTD Electronic Throttle Controller
The device is compatible w/ all 05~09 drive-by-wire Subaru Legacy (BP5/BL5)

Shipping will be provided by USPS priority w/ tracking # (Domestic: 2~3 days delivery time)
All international shipment towards Canada or Mexico will need additional $10 (6~10 days delivery time)

The MSRP of our kit is $180 shipped, Group Buy Pricing is as follows:
1~8 sets: US$150 shipped to lower US 48 states
9~16 sets: US$140 shipped to lower US 48 states
16~ sets: US$130 shipped to lower US 48 states

Payment
Please paypal to sales@twptrade.com after the end of the group buy
I will contact all the participants for confirmation.

Closing date on this group buy is 11/25, and all items will be sent no later than 11/30

If you have any question, you can PM me on the forum, email office at sales@twptrade.com/my personal at twpanson@gmail.com.

P.S. NTD Controller can be used along with a Scan gauge or other OBDport connected device, but you need to buy a cable splitter for that to work properly.

Thank you,
Panson
TWP Tech

Electronic Throttle Kit includes:
1. 12 step adjustment switch
2. Reverse cancel wire
3. Special wire connector for Subaru Legacy
4. Installation Guide
5. 1 year product warranty for replacement
6. Built-in safety bypass switch. No worry if hardware failure occurs.

Please post your name:

1. holokai (harness 4A, ship to 96825)
2. Thejroisgo harness 4A
3. Mike
4.
5.
6.

Scratch&Dent · #60 (**permalink**) 10-27-2009, 03:06 PM

One week? If you want a big group buy, maybe you could leave it a bit longer?