Random stuff

doctor J · 2022-03-04 15:15:56

https://cimg4.ibsrv.net/gimg/www.fitfreak.net-vbulletin/2000x1504/img_2022227_83035_9a57c91d69b7ca5b3788d5af225e9e31e5158ab7.jpg Broken right side motor mount, car on the junk yard. Looks like everyone soon will need replacement. https://cimg8.ibsrv.net/gimg/www.fitfreak.net-vbulletin/1500x2000/img_2022113_112331_08c5734d4603cf6e30d9515d53588304756146d9.jpg While changing the mount pay attention to this nut. If it comes WITH the covid...sorry, with the stud, the stud has damaged threads during factory engine installation (YES!) https://cimg5.ibsrv.net/gimg/www.fitfreak.net-vbulletin/1500x2000/img_2022117_6196_40df5c55f7b3b7a51c6f786f8cf207251d3f5aca.jpg Damaged threads (M10 X 1.25). https://cimg3.ibsrv.net/gimg/www.fitfreak.net-vbulletin/1500x2000/img_2022117_61919_ff3eed7c43d441741362d2872d33583ae1766eec.jpg Threads are repaired; install the stud using stud driver (cylindrical part is 13 mm diameter), I will be using cheapo 1/2" deep socket with set screw inserted into pre-drilled hole. https://cimg5.ibsrv.net/gimg/www.fitfreak.net-vbulletin/2000x1504/img_202231_154235_485ff4689f95532ec12f6a3d162df6d8c0f16a93.jpg My dashcam!

Reply Subscribe

Thread Tools

Search this Thread

Mar 4, 2022 | 10:15 AM

doctor J

Thread Starter

Member

Joined: Aug 2008

Posts: 1,606

From: Orange, CA, USA

Random stuff

Broken right side motor mount, car on the junk yard. Looks like everyone soon will need replacement.

While changing the mount pay attention to this nut. If it comes WITH the covid...sorry, with the stud, the stud has damaged threads during factory engine installation (YES!)

Damaged threads (M10 X 1.25).

Threads are repaired; install the stud using stud driver (cylindrical part is 13 mm diameter), I will be using cheapo 1/2" deep socket with set screw inserted into pre-drilled hole.