i want more traction and figures a diff would do the trick. i was wondering though if i could just weld the diff because real diffs are too expensive and i am not sure if theres any viscous counterparts for this car.

so would a welded diff help me? lmk because i have a friend that can weld diffs with jb weld.

 

Are you kidding me...

 

I'm from the good ol daze and we use to weld the gears in the rear end to make it a Possi rear end but there is no way JB weld is going to do the job that an arc welder will. Don't trash your dif and trans rethink and do more research. One day you'll laugh about the JB weld Diff

 

Sounds like a bad idea to me...

 

If you want more traction do it the right way and buy an aftermarket lsd. If you don't know how to install it, have it installed by someone who knows what they're doing. I really don't think JBweld is going to hold up to the torque in a transmission, granted we don't make a lot, I think its still too much for some JBweld.

 

weld it right lol or paysomeone to

 

Wow sounds like someone's trollin'.

On the other hand, if you are really serious, go to www.teammfactory.com. They have two types of LSD. Choose either their helical or metal plate (clutch type) LSD.

If you come up with welding the diff., ( I mean arc weld not JB weld), you'll probably send your transmission/stock diff. into oblivion when you do finally want to make a sharp turn. Do it right the first time and buy an LSD. Please.

Remember, pay your friend to weld your diff, cheap.

Your stock diff breaks and other things in you tranny breaks, you'll pay again your friend or someone to open your tranny, plus parts, or a new trans, say good bye to your money.

Buy LSD, pay for labor, nothing breaks, cheaper over all.

Good luck!!

 

good info guys.

i think i have my mind set on welding it, but just not sure how. my friend can work magic with jb weld. hes put cars together and seam welded them with jb weld and they are holding up reallll nice.

lsd's are too expensiveeee. and its mah dreams to have more grip.

 

Plain and simple you are a dipshit. Seam welded cars with JB weld? You are aware that this is unpossible right?

 

Do it... You can totally weld it with JB weld... Also by feeding sand into your throttle body you can port your head!

 

sick sick, i shall try that.

thanks for all your helps. mah dreams are becomin true.

 

i just facepalmed harder than i ever have.

 

I love the way some people take APRIL FOOLS jokes so seriously.

 

haha well, this joke went on past april 1st so technically it was a bad joke. the rule is when april 1st is over you yell APRIL FOOLS! then everyone feels dumb haha. i wish someone filled up their diff with jb weld. i need someone to laugh at.