2nd Gen GE8 Specific Fit Engine Modifications, Motor Swaps, ECU Tuning Sub-Forum Threads discussing engine mods/swaps/tuning for the 2nd generation GE8 Honda Fit.

Any suggestions for exhausts for GE8's?

Thread Tools
 
Search this Thread
 
Old Jul 14, 2009 | 08:11 PM
  #1  
iLUVYOURGE8's Avatar
Thread Starter
|
Member
Joined: Jun 2009
Posts: 72
From: Seattle, WA
Any suggestions for exhausts for GE8's?

I wanna put an aftermarket exhaust system on the Fitteh but I'm having a hard time deciding. I know about the HKS Hi-Power and the Tanabe Concept G for the GE8's but I wanna know if there are anymore that can "fit" on the GE8 since most exhausts for the Fit are only for GD's.

Thanks again for your help guys!
 
Old Jul 14, 2009 | 11:24 PM
  #2  
qbmurderer13's Avatar
Touched by his noodly appendage
iTrader: (6)
Joined: Oct 2008
Posts: 2,373
From: Orlando, FL
Only one available right now is the HKS.
 
Old Jul 15, 2009 | 11:01 AM
  #3  
09blackfit's Avatar
Member
iTrader: (2)
Joined: Oct 2008
Posts: 411
From: Signal Mountain, TN
AJ Racing just posted in their vendor section they will have their exhaust done by the middle of the month for purchase. They have some pretty good stuff. They've got pics up. I think they posted it will be around $330 US. Go check it out, it looks great.
 
Old Jul 15, 2009 | 12:23 PM
  #4  
iLUVYOURGE8's Avatar
Thread Starter
|
Member
Joined: Jun 2009
Posts: 72
From: Seattle, WA
Thanks guys (:
 
Old Jul 15, 2009 | 12:52 PM
  #5  
FITGD3's Avatar
Member
iTrader: (2)
Joined: Dec 2007
Posts: 292
From: AU
5 Year Member
JS racing FTW!!!!!!!!!!!!!!!!!!!!
 
Old Jul 17, 2009 | 03:47 PM
  #6  
Wongawa's Avatar
Member
5 Year Member
Joined: Jul 2009
Posts: 150
From: Socal
I was told that Mugen has one so I ordered that one.
 
Old Jul 28, 2009 | 07:43 PM
  #7  
90crxfreak's Avatar
Member
Joined: Jan 2009
Posts: 387
From: NJ
5 Year Member
mugen has the rear axle back... about $600
 
Old Jul 29, 2009 | 11:03 PM
  #8  
fit-jagger's Avatar
Member
Joined: Feb 2009
Posts: 139
From: Winnipeg, Manitoba, Canada
Originally Posted by FITGD3
JS racing FTW!!!!!!!!!!!!!!!!!!!!
exactly! j's racing is straight ballin
 
Old Oct 9, 2009 | 08:30 PM
  #9  
AJR Jay's Avatar
Member
5 Year Member
iTrader: (2)
Joined: Sep 2008
Posts: 306
From: Richmond, BC
Hey there,

Have you considered looking into the T1R setup for the GE8?

I've attached some additional information below.

https://www.fitfreak.net/forums/aj-r...stock-now.html

Let me know if you have any other questions or concerns.

Regards,

Jason @ AJR
 
Old Oct 28, 2009 | 04:32 AM
  #10  
Apple tunning's Avatar
New Member
Joined: Oct 2009
Posts: 11
From: Taiwan
Hi~ If you are still not decide yet. I would like to recommend the company who made my axle back to you. Here is the sound clip of my custom axle back: YouTube - MY CUSTOM REAR MUFFLER FOR FIT.

As I don't like loud sound, I asked the manufacturer to make the sound quieter. I think you can get cheaper price from them. If you are interested, please let me know. I will PM you their contact informations. (:
 
Old Oct 28, 2009 | 07:20 AM
  #11  
kkeevviinn's Avatar
Member
Joined: Sep 2009
Posts: 50
From: Perth,Australia
People been saying that J's Racing has the nice sound out of it.
 
Old Nov 1, 2009 | 01:00 AM
  #12  
GodlyLegit's Avatar
Member
Joined: Oct 2009
Posts: 21
From: Omaha, NE
Im just going to ask this cause i think im missing something. Will most parts fit my 09 Fit even if they are 07-08 besides body kits. Do the engine parts and intake/exhaust work for all Fits or are they specifically made for their respective years?

Thanks
 
Old Nov 1, 2009 | 01:17 AM
  #13  
sedanimal's Avatar
Member
Joined: Jul 2009
Posts: 171
From: USA
Originally Posted by GodlyLegit
Im just going to ask this cause i think im missing something. Will most parts fit my 09 Fit even if they are 07-08 besides body kits. Do the engine parts and intake/exhaust work for all Fits or are they specifically made for their respective years?

Thanks
iirc, intakes and exhausts are not interchangeable between GDs and GEs

but more exhausts are out..T1R 50s, J's 50s, Spoon N1, Greddy Spectrum Elite, HKS Hi-Power, Tanabe has two different ones i think
 
Old Dec 8, 2009 | 11:50 PM
  #14  
dustin_said_hi's Avatar
Member
iTrader: (1)
Joined: Aug 2009
Posts: 158
From: cypress CA
greddy ti-c!

i have mine on my ge8. LOVE IT DEARLY :]
 
Old Dec 8, 2009 | 11:59 PM
  #15  
dkang2's Avatar
Member
Joined: Dec 2008
Posts: 28
From: vancouver
Originally Posted by dustin_said_hi
greddy ti-c!

i have mine on my ge8. LOVE IT DEARLY :]
+1


Ti-C is VERY quiet though. I have mine now for about 3 weeks and it is barely louder than stock. I am going to get my hands on the T1R B-Pipe see if that helps at all.
 
Old Dec 9, 2009 | 12:47 AM
  #16  
dustin_said_hi's Avatar
Member
iTrader: (1)
Joined: Aug 2009
Posts: 158
From: cypress CA
okay everyone says that its quiet.. i dono what your talkin about. although i understand what your saying.. no were NEAR TO THE LOUDNESS of the oem exhaust.. mabe frist try takin out your silencer, and if still not loud enough. deffenetly get the t1r b-pipe
 
Old Jan 7, 2011 | 07:39 PM
  #17  
AJR Jay's Avatar
Member
5 Year Member
iTrader: (2)
Joined: Sep 2008
Posts: 306
From: Richmond, BC
If you haven't decided on an exhaust yet, the T1R is actually on special for New Years too!

Non gradient finish is also availalbe. For more info, you can PM me!

Regards,

Jason @ AJR
 
Old Jan 7, 2011 | 08:56 PM
  #18  
skinny's Avatar
Member
5 Year Member
Joined: Dec 2008
Posts: 171
From: Vancouver
i have t1r setup and i think it sounds beautiful
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
junktea1
For Sale / Want To Buy / Classified Ads for USED Fit Items
11
Jul 13, 2010 07:50 PM
jdmracer1988
2nd Gen GE8 Specific Fit Engine Modifications, Motor Swaps, ECU Tuning Sub-Forum
4
Apr 6, 2010 11:11 PM
junktea1
For Sale / Want To Buy / Classified Ads for USED Fit Items
3
Dec 7, 2009 10:43 AM
it's pronounced iVTEC
2nd Generation (GE 08-13)
15
Apr 15, 2009 07:05 PM
jdmteggy06
General Fit Talk
8
May 24, 2006 11:38 AM




All times are GMT -4. The time now is 10:53 AM.