Muffler Replacement only?
#1
Muffler Replacement only?
Has anyone done this yet on a GE8? I am looking to replace the factory muffler on my GE8 but not sure of the size on the pipe or if one of the universal ones off JC Whitney or Ebay etc will work.
If anyone has done this already can you chime in and post pics also.
Thanks!
If anyone has done this already can you chime in and post pics also.
Thanks!
#4
I had a 2 1/2" axle back pipe and glass pack muffler put together and installed on my car by a local muffler shop almost 4 years ago for about $85.00....It sounds as good as a high dollar axle back pipe and only loud when the pedal is down and the revs are up.
Last edited by Texas Coyote; 06-03-2010 at 08:08 AM.
#5
I have a post about this a few down, the Magnaflow muffler I used is universal and its part # 11132 and the muffler had to be installed on a bit of an angle due to size limitations back there but its no biggie, trust me. The sound is perfect IMO and has no rasp because I kept the resonater and I swear, noone will throw and rice at you either, its a perfect little growl
I paid a total of $170 for the muffler and install, best money I've spent on the car so far and when combined with my K&N typhoon intake, I'm completely happy with my Fit now
I paid a total of $170 for the muffler and install, best money I've spent on the car so far and when combined with my K&N typhoon intake, I'm completely happy with my Fit now
#7
I'm sure that's a nice piece, but just replacing the muffler cost me about $170 between the muffler, tip and install and the savings of $120 could go towards the intake of your choice (I prefer the K&N typhoon myself)
#10
That is a good price for a bolt on kit, but it took me too long to load that vid up but I'll try again later. I like how the total package of my car sounds, now I gotta lower it and I'll be all set
Thread
Thread Starter
Forum
Replies
Last Post
James Butler
3rd Gen GK Specific Fit Engine Modifications, Motor Swaps, ECU Tuning Sub-Forum
5
08-22-2015 12:14 PM
07fitsport
Fit Engine Modifications, Motor Swaps, ECU Tuning
7
05-16-2008 11:03 PM