hi,
im from Malaysia, the climate here is very warm, and sunny and dusty almost everyday.

i have been reading on these two cheap ABS and FRP materials for the rear spoiler. Both have their own ups and downs.

im getting the INGs or the Spoon rear spoiler for my Jazz GE8, please advice which is a better choice.

ABS or FRP?

thx

 

for the spoiler, get whichever you like the style of more. i'm assuming you're going to paint it?

the main difference between the two is when used as a ground effect lip. the plastic lip will bend/flex when the fiberglass will crack/break.

but with a spoiler, you shouldn't ever hit anything with it, so you should be fine with either.

 

is there any effect on the ABS and the FRP if its under the hot sun?

i dont want them to warp/flex when exposed to hot sun...do advice..

 

there shouldn't be any difference. i have a carbon fiber (which i think is really a fpr spoiler) and it has held up pretty well after a few years in the sun. the clearcoat is fading but that is to be expected.

 

thanks guys!

 

For FRP Raber & relavent products at very reasonable price i will reffer Fiberglass Rebar Distributors based in Alberta - FRP Distributors . I hope this may be helpful to you Mr Azizul