basically we took every possible part off the interior:












Cutted out these form from a woden board which was useless anyway



made holes :


also had to make a rectangle shape cutout in the big screw area so it will fit good for the door, forgot to capture this sorry.



then used the original big screw as you can see
and this tape around the all speaker bracket to stick it to the door:
http://www.ebay.com/itm/Hot-3M-Strong-Permanent-Double-Sided-Super-Sticky-Tape-Roll-Versatile-Adhesive-/181647582841?var=&hash=item2a4b0a2679

BEFORE THAT
we ran all the cables. wich was a pain in the ass, well not for me for my but for my bf , hardest part was the drivers seat door, gotta say took us some time.





also have to mention that we left the crossovers in the back, we ran 2 cable to each side in the front. soon will post the pictures of the subwoofer and the amplifiers and stuff.


also soon will get the 6.5 morels speakers, will post the self made brackets