2nd Generation (GE 08-13) 2nd Generation specific talk and questions here.

HKS Hi-Power out now

Thread Tools
 
Search this Thread
 
Old May 11, 2009 | 09:18 PM
  #21  
phillip's Avatar
Member
Joined: Apr 2009
Posts: 111
From: Fredericksburg, VA
Originally Posted by it's pronounced iVTEC
i think i'm goint to wait until sumer, that way most companies will have exhausts out, and i can compare. i'm still holding out for the T1R, A&J said that it'll sound like the j's 50rs, but not titanium so it'll be alot cheaper
ive also been talking to ajr about it and from what they told me i got the impression it would be not quite as loud as the j's. they told me it would have the dolphin tip and just slightly louder than the t1r 50s v2(which i like the sound of but thought it was significantly quieter than j's) because of the smaller resonator. i could be wrong but either way the fact that i believe it will be quieter and available sooner than the j's i dont mind waiting a couple weeks and paying more than the hks. also my friend wait4thefit had the hks and i liked the sound and didnt think it was too loud, but he got a ticket for it. probably because its so obvious by the size that its an aftermarket exhaust. the t1r should be much more discreet
 

Last edited by phillip; May 11, 2009 at 09:22 PM.
Old May 22, 2009 | 08:57 PM
  #22  
rodrez.'s Avatar
Member
Joined: May 2009
Posts: 25
From: San Diego
We have the HKS exhaust installed on our Fit, and will have a dyno report in the July issue of Honda Tuning Magazine, available in early June. I can tell you that the sound, IMO, is excellent. There's no "drone" under minor load, and even at full throttle, it sounds sporty and not hollow.
Coming from the Civic world, there were a ton of exhausts that just sounded ridiculous, and thankfully HKS didn't go that route.
 
Old May 23, 2009 | 03:39 AM
  #23  
stalonehong's Avatar
Member
iTrader: (1)
Joined: May 2009
Posts: 204
From: San Francisco, CA
Originally Posted by rodrez.
We have the HKS exhaust installed on our Fit, and will have a dyno report in the July issue of Honda Tuning Magazine, available in early June. I can tell you that the sound, IMO, is excellent. There's no "drone" under minor load, and even at full throttle, it sounds sporty and not hollow.
Coming from the Civic world, there were a ton of exhausts that just sounded ridiculous, and thankfully HKS didn't go that route.

any pics? i wanna see how the hks exhaust settles from the back.
 
Old May 25, 2009 | 11:43 PM
  #24  
rodrez.'s Avatar
Member
Joined: May 2009
Posts: 25
From: San Diego
Originally Posted by stalonehong
any pics? i wanna see how the hks exhaust settles from the back.

Name:  HKSex2.jpg
Views: 88
Size:  47.5 KB

Name:  HKSex1.jpg
Views: 78
Size:  54.0 KB
 
Old May 26, 2009 | 12:49 AM
  #25  
jdmsneakerhead's Avatar
Joined: Dec 2008
Posts: 244
From: Norwalk, CA
5 Year Member
very nice, but i still would like to see a legamax exhaust from hks for the GE
 
Old May 26, 2009 | 05:29 AM
  #26  
kingofpicklez's Avatar
Member
iTrader: (1)
Joined: Jul 2008
Posts: 892
From: Cupertino, CA
Originally Posted by jdmsneakerhead
just called my shop and they said around $250 for the exhaust and they will call hks again 2morrow to check physical stock
did they have it physically in stock?
 
Old May 26, 2009 | 11:11 AM
  #27  
ken_vs_ryu's Avatar
Member
Joined: Jul 2008
Posts: 194
From: on point
I want these. Are these bolt on?
 
Old May 27, 2009 | 05:41 AM
  #28  
kingofpicklez's Avatar
Member
iTrader: (1)
Joined: Jul 2008
Posts: 892
From: Cupertino, CA
does anyone know where i can order it online because i've done a few searches and i have come up with only the 07-08 ones :/

edit: i did a search using the part # and i got two sites

http://www.advancespeedshop.com/hipo...6-p-11688.html

http://www.optionsauto.com/HKS/prodi...KS-32003-BH006
 

Last edited by kingofpicklez; May 27, 2009 at 06:06 AM.
Old May 27, 2009 | 07:04 AM
  #29  
LaZyBoI's Avatar
Member
5 Year Member
iTrader: (3)
Joined: Jan 2008
Posts: 534
From: Alhambra, CA
Originally Posted by kingofpicklez
does anyone know where i can order it online because i've done a few searches and i have come up with only the 07-08 ones :/

edit: i did a search using the part # and i got two sites

HKS Hi-Power Axle Back Exhaust System for 2009-2010 Honda Fit - P/N: 32003-BH006

HKS HI-POWER AXLE-BACK EXHAUST: FIT 2009-Options Auto Salon
advance speed shop isn't that far from my place.. picked up Nokyo Artic Yellow bulbs from them. Small little shop. If you have any trouble, I can always go down there and question them in person for you Options Auto is a bit further, but if anything were to come up.. anything for a fellow fitfreak
 
Old May 27, 2009 | 07:10 AM
  #30  
kingofpicklez's Avatar
Member
iTrader: (1)
Joined: Jul 2008
Posts: 892
From: Cupertino, CA
awesome imma use online as a last resort i'm asking a local shop if they are going to carry the product first. thanks for the offer!
 
Old May 27, 2009 | 12:06 PM
  #31  
skytanker2003's Avatar
Member
Joined: Nov 2008
Posts: 83
From: Grand Forks AFB, ND
Originally Posted by it's pronounced iVTEC
if i had money!

Sadly, every tuners weakness! I wish I wasn't in the military so I could try to get picked up at a tuner magazine! hahaha!
 
Old May 27, 2009 | 11:17 PM
  #32  
phillip's Avatar
Member
Joined: Apr 2009
Posts: 111
From: Fredericksburg, VA
thanks for the links!
i'm gettin sick of waiting for the t1r axleback and i love the sound of the hks!
 
Old May 28, 2009 | 02:06 PM
  #33  
Malice101's Avatar
Member
Joined: Feb 2009
Posts: 204
From: Santa Clarita, Ca
Just ordered mine from Advance Speed Picking it up tonight but won't be able to install it till Saturday...I'll snap a few pics before/during/after.
 
Old May 28, 2009 | 04:41 PM
  #34  
qbmurderer13's Avatar
Touched by his noodly appendage
iTrader: (6)
Joined: Oct 2008
Posts: 2,373
From: Orlando, FL
Sound clips please
 
Old May 28, 2009 | 09:23 PM
  #35  
phillip's Avatar
Member
Joined: Apr 2009
Posts: 111
From: Fredericksburg, VA
ordered mine from option and talked to the dude today on the phone. mine should be here early next week and i'll install and post sound clips asap!
 
Old May 28, 2009 | 09:47 PM
  #36  
Malice101's Avatar
Member
Joined: Feb 2009
Posts: 204
From: Santa Clarita, Ca
Well here's some teaser pics for ya Phillip If they aren't big enough I can bump the rez and reshoot...

(images are thumbnails)


Picked up a floor jack and stands on the way home so I'll have it installed tomorrow after work...and yes I'll post some sound/video. Kinda surprised at the diameter of the tip. From the pics posted upstream it didn't look that much larger than stock. Not complaining I'm sure it'll look plenty sweet once installed...
 
Old May 28, 2009 | 10:03 PM
  #37  
Tork's Avatar
Member
5 Year Member
iTrader: (2)
Joined: Mar 2007
Posts: 1,251
From: Winthrop Harbor Illinois/ Presque Isle Wisconsin
Originally Posted by Malice101
Well here's some teaser pics for ya Phillip If they aren't big enough I can bump the rez and reshoot...

(images are thumbnails)

Very nice! I would greatly appreciate it if you could post the weight of the HKS and the stock muffler.
Thanks in advance.
 
Old May 28, 2009 | 10:22 PM
  #38  
Malice101's Avatar
Member
Joined: Feb 2009
Posts: 204
From: Santa Clarita, Ca
Originally Posted by Tork
Very nice! I would greatly appreciate it if you could post the weight of the HKS and the stock muffler.
Thanks in advance.
HKS is 11lbs 9oz...I'll be sure and measure the stock unit tomorrow.
 
Old May 28, 2009 | 10:45 PM
  #39  
phillip's Avatar
Member
Joined: Apr 2009
Posts: 111
From: Fredericksburg, VA
awww man this will make waiting over the weekend even harder. looks great!
 
Old May 28, 2009 | 11:00 PM
  #40  
Tork's Avatar
Member
5 Year Member
iTrader: (2)
Joined: Mar 2007
Posts: 1,251
From: Winthrop Harbor Illinois/ Presque Isle Wisconsin
Originally Posted by Malice101
HKS is 11lbs 9oz...I'll be sure and measure the stock unit tomorrow.
Thank you and + rep!
That is pretty good as I think the Titanium TR1 is just under 9 lbs (presuming that is about as light as they are going to get, and that one IS SPENDY)
Will be interesting to see the stock weight.
 



All times are GMT -4. The time now is 11:46 AM.