2nd Generation (GE 08-13) 2nd Generation specific talk and questions here.
View Poll Results: Have you had to replace your A/C condenser?
Yes, I have had to replace my A/C condenser
5.81%
No, I have not had to replace my condenser and have not added any additional protection
55.48%
No, but I have added either a billet grille or wire mesh for protection
38.71%
Voters: 155. You may not vote on this poll

Poll: Regarding damage to A/C Condenser

Thread Tools
 
Search this Thread
 
Old Aug 19, 2009 | 04:01 AM
  #41  
Shockwave199's Avatar
Member
5 Year Member
Joined: Aug 2009
Posts: 953
From: NY
Can you post pictures of that install? The pictures in the ebay listing are hard to see. How is it that only the plate holder needs to come off for this install? Looks like it's installed behind the body opening.

Oh...this looks like a full thingy that installs in FRONT of and onto the body opening. Hmmmm.

No, I think it's behind the grille. I'm confused with this one because of only needing to remove the plate holder.

Dan
 

Last edited by Shockwave199; Aug 19, 2009 at 04:16 AM.
Old Aug 19, 2009 | 05:43 PM
  #42  
Shockwave199's Avatar
Member
5 Year Member
Joined: Aug 2009
Posts: 953
From: NY
Has anyone else use the product that was just suggested?

Dan
 
Old Aug 19, 2009 | 06:52 PM
  #43  
Malice101's Avatar
Member
Joined: Feb 2009
Posts: 204
From: Santa Clarita, Ca
Originally Posted by Shockwave199
Has anyone else use the product that was just suggested?

Dan
Haven't used it but it's behind the existing grill from the only good picture they posted. Don't see how they can make that claim...you need to remove the shroud above the grill and to make it even more accessible the grill too...both easy to do but they are blowin smoke regarding removing only the license plate holder.
 
Old Aug 19, 2009 | 09:17 PM
  #44  
Shockwave199's Avatar
Member
5 Year Member
Joined: Aug 2009
Posts: 953
From: NY
I thought so too. Just can't see how this can be done the way they say. Kind of expensive too, compared to other options.

Dan
 
Old Oct 24, 2009 | 10:51 AM
  #45  
mlee97's Avatar
New Member
Joined: Sep 2009
Posts: 1
From: Friendsville, TN
A small pebble took out my condenser grill as well. I fixed it myself as cheaply as possible. Here's how it broke down:
$99 condenser on ebay with $24 shipping = $124
two cans of freon from autozone = $18
purchase r134 gauge manifold on craigslist = $20
purchase r134a vac unit from Harbor Freight = $15

Total cost = $177
 
Old Oct 24, 2009 | 04:06 PM
  #46  
jsusanka's Avatar
Member
Joined: Dec 2008
Posts: 36
From: US
I saw on Keith Oberman this week a family driving in their fit hit a coyote and when they arrived at their destination he was alive and in the grill.

They found him when they opened the hood. He went through the opening where the condensers are being taken out.

Now come on honda you need to have some kind of recall for a fix. When you can fit a coyote in the fricken grill there is a problem.
 
Old Oct 24, 2009 | 05:49 PM
  #47  
Krizz's Avatar
Member
5 Year Member
Joined: Jul 2009
Posts: 160
From: Columbus, Ohio
 
Old Sep 7, 2011 | 12:00 AM
  #48  
kasangkasya's Avatar
New Member
Joined: Aug 2009
Posts: 2
From: Riverside County USA
AC condenser

Ebay has listings.
2009 Honda Fit Mesh Grille for $19 plus delivery. Easy to install and would be enough to protect your condenser.
 
Old Feb 17, 2012 | 02:27 PM
  #49  
Cheung's Avatar
New Member
Joined: Feb 2012
Posts: 1
From: Tampa, FL
Question 2011 Jazz lower grille?

Apparently just lost the A/C condenser on my 2011 Fit (7,000 mi) to road debris. Haven't needed it (it's February) so I'm not sure when it actually went. Anyway, I wanted to get a grille for down there before I had it replaced ($850 was the estimate at my dealer). While browsing the interwebs I stumbled on a picture of the 2011 Jazz (below). My eyes immediately go to the bottom and low and behold there's a honeycomb grille down there! Any idea if I can get this some place? I tried some quick google searches but have come up empty. Anyone know if there's a Honda supplier that would ship a Jazz grille to the US?

 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
manxman
Fit DIY: Repair & Maintenance
109
Oct 24, 2013 04:00 AM
Chad T
2nd Generation (GE 08-13)
16
May 19, 2012 11:38 PM
littleblackcar
General Fit Talk
14
Oct 25, 2011 10:03 PM
Spacecoast
2nd Generation (GE 08-13)
4
Oct 8, 2009 10:35 PM
manxman
Fit Exterior Modifications & JDM Styling
21
Aug 8, 2009 03:44 AM




All times are GMT -4. The time now is 03:06 PM.