Removing stock spoiler
#2
its pretty easy. all you need is a flathead or some sort of that being lol, and the right size socket but i forgot the size lol. i will not be resposible for any damages =]
anyways becareful for these steps.
1. use flathead or whatever and pop open the clips. caution: when poping off the clips you might scratch and spoiler a little but it wont be too noticable.
2. after use a socket and loosen and remove the bolt under each clip.
3. hold the spoiler firmly and push up. it might be hard and it might seem that you are going to break it but you wont. its just a bunch of clips holding the spoiler down.
now you are done =]...i have a SSM Fit and took my spoiler off and put on a black one =] why are you removing yours anyways ?
anyways becareful for these steps.
1. use flathead or whatever and pop open the clips. caution: when poping off the clips you might scratch and spoiler a little but it wont be too noticable.
2. after use a socket and loosen and remove the bolt under each clip.
3. hold the spoiler firmly and push up. it might be hard and it might seem that you are going to break it but you wont. its just a bunch of clips holding the spoiler down.
now you are done =]...i have a SSM Fit and took my spoiler off and put on a black one =] why are you removing yours anyways ?
#4
Hang on to it. As soon as last clip lets go it will fall. No I did not drop mine
Here is mine tilted - thread here https://www.fitfreak.net/forums/2nd-...ler-mod-2.html
Here is mine tilted - thread here https://www.fitfreak.net/forums/2nd-...ler-mod-2.html
Thread
Thread Starter
Forum
Replies
Last Post
Lyon[Nightroad]
2nd Generation (GE 08-13)
103
01-23-2017 07:17 PM
pgattu
General Fit Modifications Discussion
11
07-10-2013 07:20 PM