2nd Generation (GE 08-13) 2nd Generation specific talk and questions here.

Aftermarket outside temp gauge...anyone install one yet?

Thread Tools
 
Search this Thread
 
  #1  
Old 01-26-2011, 07:41 AM
Kingfisher's Avatar
Member
Thread Starter
Join Date: Jan 2011
Location: PA
Posts: 27
Aftermarket outside temp gauge...anyone install one yet?

The only reading I'd like to have inside my 09 Fit Sport is an outside temp reading. I see several on the market...what do you think/anyone with experience in these non-oem pieces?
 
  #2  
Old 01-26-2011, 01:05 PM
annunC8's Avatar
Member
5 Year Member
Join Date: Dec 2009
Location: USA
Posts: 726
Originally Posted by Kingfisher
The only reading I'd like to have inside my 09 Fit Sport is an outside temp reading. I see several on the market...what do you think/anyone with experience in these non-oem pieces?
Not sure about stand-alone temp. devices, but there are more than a few threads from those who have installed self-dimming rear view mirrors with temp. gauges, some with temp. and compass. I'm not saying there aren't threads about stand-alone devices, I just don't recall any.

Just do a forum search for what you're asking... like I said, there are more than a few threads/posts relating to the topic, in some form or another.
 
  #3  
Old 01-26-2011, 01:28 PM
Perrenoud Fit's Avatar
Member
5 Year Member
iTrader: (2)
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
I ran the probe out to the inter fender cavity on the dr. side. for a truer reading. unit is under the heater controlls.
 
  #4  
Old 01-26-2011, 02:15 PM
Join Date: May 2010
Location: Capital Distric New York
Posts: 3,416
I went with the Gentex_21A, a really nice OEM quality unit. Temp sensor is mounted just behind the front license plate about 18" above pavement.

Mike what unit do you have there? I spent a bunch of time trying to find something like that before I settled on the Gentex. Actually had a guy in SEAsia talking me through some units he produced. I think he might have thought I was into a large order. Your car is looking as good as always_ I've gotta spring for the faux trim someday.
 
  #5  
Old 01-26-2011, 02:54 PM
spreadhead's Avatar
Member
5 Year Member
Join Date: Jun 2006
Location: Chattanooga
Posts: 1,104
  #6  
Old 01-26-2011, 04:25 PM
Perrenoud Fit's Avatar
Member
5 Year Member
iTrader: (2)
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
Hey Chuck!
Is got temp in/out, voltage reading!, ice warning, lap timer, clock, timer, back lit. and prob something I'm forgetting.. more info coming to ya.
Mike
 
  #7  
Old 01-26-2011, 06:14 PM
Perrenoud Fit's Avatar
Member
5 Year Member
iTrader: (2)
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
Show Chrome Accessories (Big Bike Parts) 5 in 1 Digital Volt Meter RTI01

29.99
 

Last edited by Perrenoud Fit; 01-26-2011 at 06:18 PM.
  #8  
Old 01-26-2011, 07:20 PM
arter's Avatar
New Member
Join Date: Dec 2010
Location: New York
Posts: 5
Just get an aquarium thermometer with an adhesive stick cup on it and stick it on the outside of your window.

I put one of the temp/compass rear view mirrors in on my RAV4 and that works quite nice ( but $ 300 so...).
 
  #9  
Old 01-26-2011, 07:51 PM
Join Date: May 2010
Location: Capital Distric New York
Posts: 3,416
Check em on Amazon - bit cheaper.
 
  #10  
Old 01-26-2011, 09:15 PM
specboy's Avatar
Member
5 Year Member
Join Date: Aug 2009
Location: Vermont
Posts: 2,462
I spent $8 on mine. A Bell Indoor/outdoor thermometer with the sensor stuck to one of the hinge posts on the driver's side door. Even has black/silver as the colors so it blends right in. The only down-side is that at night, it is tough to see but I rarely drive at night (or I'd add a small light with a button I could press to illuminate it).

of note, the other day it was accurately reading -22 degrees Fahrenheit. DAMN it was cold. Most LCD Thermometers I've had have had issues below 0F, let alone down to -22F. This one worked like a champ.

for 8 bucks, I got my money's worth.



Another pic or two can be found here

~SB
 

Last edited by specboy; 01-26-2011 at 09:19 PM.
  #11  
Old 01-27-2011, 05:54 PM
caliban10010's Avatar
Member
5 Year Member
Join Date: Feb 2009
Location: Baton Rouge, LA
Posts: 74
I went with the Rearview mirror combo.



Sensor in lower left-hand side of bottom air dam.

 
  #12  
Old 01-28-2011, 01:07 AM
dryheat's Avatar
New Member
5 Year Member
Join Date: Mar 2010
Location: Marana, AZ
Posts: 14
Question Rearview mirror combo

Caliban, where did you get this mirror combination and what did it cost. It's just what I've been looking for.

dryheat
 
  #13  
Old 01-28-2011, 01:47 AM
Jodele's Avatar
Member
5 Year Member
iTrader: (2)
Join Date: Oct 2007
Location: Cincinnati, OH
Posts: 589
After seeing this thread, I found this one that I plan to install in my '07 Sport...

Gentex Auto Dimming Rear View Mirror With Compass Temperature and Lights
 
  #14  
Old 01-28-2011, 01:52 AM
caliban10010's Avatar
Member
5 Year Member
Join Date: Feb 2009
Location: Baton Rouge, LA
Posts: 74
Originally Posted by dryheat
Caliban, where did you get this mirror combination and what did it cost. It's just what I've been looking for.

dryheat
Ordered from Amazon for about $150. CIPA 36500. Here's a link to a thread where I posted my install. https://www.fitfreak.net/forums/2nd-...acement-2.html
 
  #15  
Old 01-28-2011, 01:44 PM
dryheat's Avatar
New Member
5 Year Member
Join Date: Mar 2010
Location: Marana, AZ
Posts: 14
Thumbs up Indoor/outdoor temp gauge mirror

Caliban,

Thank you so much and thanks for your installation photos. I wish I was handy enough to install it myself. I'll have to check around and find somewhere to get it done.
You won't believe this but I traded in a Lexus ES350 for my 10 Sport. The Lexus was no longer fun to drive, but the only things I really miss are the outside thermometer and the armrest console.

Thanks
Dryheat
 
  #16  
Old 03-28-2011, 11:54 AM
Jodele's Avatar
Member
5 Year Member
iTrader: (2)
Join Date: Oct 2007
Location: Cincinnati, OH
Posts: 589
This is what the Gentex mirror looks like...it also has LED map light underneath...


It just barely cleared the visors...oh, this is a GD3

 
  #17  
Old 03-28-2011, 12:10 PM
Join Date: May 2010
Location: Capital Distric New York
Posts: 3,416
Here's the thread I followed on my Gentex21A install: https://www.fitfreak.net/forums/fit-...-homelink.html
 
  #18  
Old 06-19-2012, 06:03 PM
jimbichon's Avatar
New Member
5 Year Member
Join Date: May 2012
Location: murphy
Posts: 1
Just received my AEI outside thermometer. The only function is reading the outside temp. However, I need to cut a hole somewhere in the dash for it to slide into and am not sure of the best location. It is not lighted so I thought the middle of the upper glove box would work but feels like it's double thick - and - if I screw it up it's probably big bucks. Other location is next to the 12v outlet but ca't get in see what's behind. Any suggestion? BTW, unit was $28 including ship thru Amazon
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Beitzel15
General Fit Talk
13
02-15-2022 01:42 PM
my2010fit
2nd Generation (GE 08-13)
19
11-29-2013 08:59 PM
inertiajim
2nd Generation (GE 08-13)
21
11-04-2009 06:16 PM
tiddlermx23
Fit DIY: Repair & Maintenance
5
08-08-2008 06:54 PM
Firebat666
General Fit Talk
7
11-11-2007 10:23 AM



Quick Reply: Aftermarket outside temp gauge...anyone install one yet?



All times are GMT -4. The time now is 03:11 AM.